Model | Fujikura 12S Fusion Splicer |
Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) |
Cladding Diameter | 125 µm |
Coating Diameter | 250 µm or 900 µm |
Fiber Cleave Length | 5 mm to 13 mm |
Typical Average Splice Loss | 0.05 dB (SM), 0.02 dB (MM), 0.08 dB (DS) and 0.08 dB (NZDS) |
Splicing Time | Typical 15 sec with SM |
Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
Splicing Modes | Total 100 splice modes |
Splice Loss Estimate | Based on dual camera cladding alignment data |
Storage of Splice Result | Last 2,000 splices |
Fiber Display | 4.5 inch TFT color LCD with X or Y view or both X and Y view simultaneously |
Magnification | 100X magnification for X/Y view |
Viewing Method | 2 axis CMOS camera |
Operating Condition | Altitude: 0 to 3,660 m above sea level, 10° to 50° C, Humidity: 0 to 95% RH, non-dew |
Mechanical Proof Test | 1.96 N |
Tube Heater | 30 heating modes |
Tube Heating Time | Typical 30 sec with FP-03 (60 mm) sleeve |
Protection Sleeve Length | 60 mm, 40 mm, micro |
Splice/Heat Cycles with Battery | Typical 100 cycles with BTR-10 |
Electrode Life | 3,000 splices |
Power supply | Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery |
Terminals | USB 2.0 |
Wind Protection | Maximum wind velocity of 15 m/s. (34 mph) |
Dimensions | 121 x 162 x 57 (mm) / 4.76 x 6.38 x 2.24 (inches) |
Weight | .776 kg (1.71 lbs) with battery |