Ring Door Knocker Solid Brass Heavy Duty Bolt Through Fixings 4.3" Inch (110mm) PB28
Our heavy duty ring door knocker has a timeless resounding knock, mixing the traditional build with a stunning modern finish. Manufactured from high quality solid brass, then hand polished and topped off with a durable coating.
These ring knockers come as a solid, sturdy unit, with a gently tapered ring shape. The knocker has a through fixing for strength and stability.
A door knocker is often the focal centre of the facade of a home and the knocker you choose can say a lot about your sense of style and taste. This knocker offers that real sense of vision and adds the perfect finish to all doors.
Features:
- Bolt through method
- Solid brass construction
- Hand Polished
- Fixings included
What's in the pack?
1 x Ring Knocker 4.3" with Fixing Plate
1 x Striking Plate
1 x Fixings Pack
Dimensions:
- Length: 110mm
- Width: 110mm
- Depth: 34mm
- Ring Diameter:110mm
- Bolt fixing centres: 85mm
- To Suit Door Thickness: Up to 60mm
All measurements are approximate.
Installation:
Tools required: Pencil, tape measure, spirit level, electric drill and drill bit and spanner.
1: Measure the spacing between the fixing positions on the door knocker; you will require three holes; two for the door knocker itself and one for the striking plate. Then select where you want to place the knocker on your door. Using a pencil, mark on the door where each bolt will go.
2: With the electric drill and the correct sized drill bit, carefully drill holes all the way through your door. Clean the holes so that they are free of dust and particles.
3: Place the striking plate bolt through the correct hole, ensuring that the nut is on the inside of the door (trim to the correct length as necessary); screw the bolt into your striking plate securely. Next, put the other bolts through the other holes and screw them into the door knocker. Use a wrench or spanner to gently tighten all bolts. (Please note that some knockers may have small grub screws to stop the fixing and striking plates rotating, these will require separate shallow drill holes).
4: Wipe the knocker clean of any dust from the installation, stand back and admire your good work!