3PIN 4PIN 17 key remote control RGB controller:

**It adopts Molex 4Pin 3PIN interface, compatible with computer motherboard plug, input interface line sequence +5v, DA, GND, input power terminal adopts Molex 4pin interface universal, RF remote control, distance up to 8-25 meters, operation is sensitive and user-friendly, wiring is simple and convenient Support for custom single- and double-line LED driver ICs on the market; with more than 300 kinds of pattern effects, colorful.
**3PIN Controller working voltage: DC 5V
**Current: up to 6A, to control Max 2048 pixels, power input with reverse connection
**The controller will automatically save the user's key settings every time. After the breakpoint, the next time the power-on controller will run according to the original settings.

Product Specifications:
Working temperature: -20-60 °C
Supply voltage: DC 5V
Output: 3 loop
Connection method: Anode
Maximum load current: 2A per way
Output power: 5V<30W
Compatiable IC: WS2812,SK6812

Note:

1 When switched to dynamic mode, the brightness rises to speed plus, the brightness decreases to speed minus, there are 100 speed files;
2 when the last state is press FADE or SMOOTH, press FLASH and STROBE The key is invalid. Only when the last state is static mode, FLASH and STROBE are valid.
3 When FADE is used as the three-color gradient, press FADE again to change to seven-color gradient. When pressing SMOOTH for three-color transition, press SMOOTH again. It becomes a seven-color jump.

Features:

1. Support ASUS / MSI / ASRock / other motherboards, the line is quite plug-in function
2. The line is RGB split line, not a fan split line, and does not support the motherboard fan (FAN) interface! ! !
3. If use for RGB fan is, please make sure the interface is consistent or can be connected.

ARGB mini controller Specification:
Interface type: SATA, 5v-3PIN
Cable length: 3PIN: 160(±10) mm; SATA: 500(±10)mm
Weight: 30g
Size: 46x22x9.5mm/1.81x0.87x0.37in

Product introduction:
This controller is a 5V 3-pin ARGB product to SATA power supply controller, it does not need motherboard support, directly plug in the power supply SATA interface to supply power.
Through the built-in light mode of the controller, the light control of 5V3-pin ARGB products can be realized.
Note: This controller does not support connecting the motherboard software to control the light synchronization!

Feature:
Exquisite workmanship, individual technological appearance, create cool light.
Broad compatibility. The standard 5V ARGB interface is compatible with various light-emitting products with the standard universal 5V 3-pin A RGB interface on the market, so there is no need to worry about compatibility issues.
Meet the requirements of most chassis for wire length. The 5V 3-pin interface adopts an extension cord design, which is convenient for connection and not easy to fall off, and at the same time solves the problem of insufficient wire length. The length of the interface cable is 160±10mm, and the length of the power supply cable is 500±10mm. (Note: SATA power supply interface, directly connected to the computer power supply does not need the motherboard to support 5V 3-pin ARGB to control the lighting of ARGB products).
Simple button design, simple operation and practical function. (M key click to switch to the next light mode, you can cycle to switch the controller's own light mode; S key to click to switch the light change speed, a total of 8 gears can be cycled; press and hold the S key for 4 seconds to turn off the light, and then long Press for 4 seconds to turn on the light; click the C key to switch to other light colors under the same style or reverse the light, long press the C key for 5 seconds to switch the brightness of the light, a total of 6 levels of brightness can be decreased and cycled).