[Exhibit]
・Body: SHARP X68000 SUPER-HD CZ-623C-TN
・Memory: 2MB operation confirmed
・Hard disk: None
*Expansion slot available: 2 slots available
*Since the built-in HDD has been removed, a terminator (final resistor) is attached to the interface board.
*The shield plate (right tower) is attached
*There are fine paint unevenness and scratches due to aging and use.
・Human68k ver3.02 (1 test boot disk)
* The exhibit is only the main body. The operation confirmation screen does not include the software and externally connected devices used to confirm the operation.
[Maintenance content]
・Power supply unit: PCB cleaning, capacitor replacement, voltage adjustment
・FDD unit: Full overhaul cleaning ・Capacitor replacement ・Grease up ・Head cleaning (using IPA)
・Main board ・Control board ・Analog board: Capacitor replacement
[Regarding various ports]
・POWER LED lighting/blinking: Operation OK
・RESET button ・INTERRUPT button: Operation OK
・JOY1/2 ports: Operation OK
・A keyboard terminal: Operation is OK
・Mouse terminal: Operation check OK
・Headphone terminal (front): Operation OK
・AUDIO OUT terminal (rear): Operation OK
・Volume: Volume normal ・No gully sound
・FDD port: External FDD device recognition/operation OK
・SCSI port: External SCSI device recognition/operation OK
・RS-232C port: External MIDI device recognition/operation OK
*Because there is no test environment for ports other than the above, operation has not been confirmed.
[About the backup battery] ・The backup battery has been changed to a socket (CR2450).
[Regarding the operation of FDD]
・FDD (Drive 0/1): Operation OK (Read/Write/Delete/Initialize)
* We have checked the operation of A/B, A->B, and B->A using the FORMAT, DISKCOPY, MD, and RD commands.
・Moving parts such as the shaft, gear, and wheel of the FDD head have been disassembled and cleaned, and grease has been applied.
* Since the drive itself is not new, it may not work properly depending on the environment and conditions in which it is used.
・We take measures to prevent screws from loosening.
・The FDD head has been carefully cleaned with IPA.
* FDD has the highest failure frequency, and since it uses FD (floppy) about 30 years ago, abnormalities such as CRC error occur due to floppy, mold, dust, etc., and the drive breaks down. Since each part is not new, it is prone to deterioration depending on the frequency of use, and it is a part that deteriorates and breaks down just like the power supply.
* About 30 years have passed since the X68000 was released, so the FDD and HDD are still working, but there is a good chance that they will break down. Thank you for your understanding.
* The expansion memory is set by the switch command, and the installed memory has been confirmed to work including recognition using Memtest68k etc.
*The time and date are set with the time command, and the operation of the clock has been confirmed.
* Regarding rusted screws, they have been replaced with new screws of the same specifications.
* The claws of the plastic case are also missing due to deterioration over time.
* Various rusted rear terminals have been polished as much as possible.
* The manufacturing number etc. are mosaiced.
*System settings are minimal.
*This is not a one-owner product.
[Important]
About 30 years have passed since the X68000 was released.
We have checked the operation including the current situation in advance before listing.
We only accept ebay managed payments.
Please pay within 3 days after auction is finished.
Free Shipping Worldwide!!
Shipping Duration
| Shipping Method |
Asia | North America Central America Middle East AU, NZ |
Europe Russia |
South America Africa |
|---|---|---|---|---|
| EMS | 3 - 6 days | 4 - 6 days | 3 - 5 days | 4 - 6 days |
| ePacket | 3 - 7 days | 5 - 12 days | 4 - 8 days | 6 - 8 days |
Money back guarantee within 60 days if returned by customer.
1)Welcome to wholesale and purchase, if you have any question, please contact us first. We will reply you within 24 hours.(except weekends and holidays).
2)Our normal business hour is Monday through Friday 9 AM to 6 PM Japan Time. All emails and orders will NOT be processed during weekends and holidays.
3)We will leave positive feedback to buyer as soon as buyer pays for the item. We highly appreciate that you can contact us before you leaving Negative feedback or Neutral feedback. We will offer help to resolve your problems as fast as possible.
The item which I have listed are very popular items.
Since it may be rarely sold out, contact me before purchasing.
If you have any issues with an item upon receiving it,
please don't hesitate to contact us. We are here to help!
Relax and enjoy.
Welcome to Japanese goods shop !!!
I am Japanese and live in Japan.
I offer good quality Japanese items.
If you can not find the item you are looking for, Please feel free to ask us!
Story -
I deal mainly with Japanese fashion, audio, and books.
I earlier, I was a white-collar worker in Japan.
However, I learned that there are many people who need Japanese goods all over the world.
The Internet is popular in the world I decided to sell Japanese goods, resigned the white-collar worker.
Mission -
I want to serve you.
I want to see your happy face.
Import duties, taxes, and charges are not included in the item price or shipping charges.
These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.