WARRANTY
FREE SHIPPING
FAST DISPATCH
AUSTRALIAN SUPPORT
New, open box, unused item.
The DXLink 4K HDMI Receiver is a 4K and Ultra High Definition (UHD) capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over one shielded Cat6A or Cat7 standard twisted pair cable up to 70 meters.
Common Applications
DXLink HDMI Receiver Modules are the perfect for receiving HDMI and control signals over long distances from a remote DXLink Transmitter Module or other compatible AMX Transmitter such as Solecis. The receiver's built-in control ports can be used to control a destination device and the ICS Lan port provides IP an access point with used in conjunction with the Enova DGX 100 Series.
Features
- 4K and Ultra High Definition (UHD) Support – Experience high-quality video resolution for 4K devices.
- Only One Cable – Receive audio and video while passing control, Ethernet and power over one twisted pair cable
- SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
- Native NetLinx® Control Everywhere - Control connected destination devices using the built-in IR and RS-232 ports
- Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
- HDCP Compliant
- DXLink Direct Connection with DXLink Wallplates - When DXLink Wallplates are receiving Power over DXLink from the PS-POE-AT-TC or PDXL-2, they can be connected directly to a DXLink Receiver for a point-to-point solution. Solecis Digital Switchers can also be used in point-to-point applications with a DXLink Receiver.
* AMX only supports the following DXLink Power sourcing devices for the DX-RX: Enova DGX 800/1600/3200/6400 Digital Media Switcher, Compatible Enova DVX All-In-One Presentation Switcher (Enova DVX-2150HD or DVX-2155HD), PS-POE-AT-TC High Power PoE Injector, PDXL-2 Power over DXLink Controller, Solecis SDX-510M-DX and SDX-514M-DX. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. The DXLink HDMI 4K RX can also be powered via the included desktop power supply (ENERGY STAR® qualified) with power cord.
AMX DXLink 4K HDMI Receiver Module DX-RX-4K P/N: FG1010-510 - New, Open Box
DESCRIPTION
New, open box, unused item.
The DXLink 4K HDMI Receiver is a 4K and Ultra High Definition (UHD) capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over one shielded Cat6A or Cat7 standard twisted pair cable up to 70 meters.
Common Applications
DXLink HDMI Receiver Modules are the perfect for receiving HDMI and control signals over long distances from a remote DXLink Transmitter Module or other compatible AMX Transmitter such as Solecis. The receiver's built-in control ports can be used to control a destination device and the ICS Lan port provides IP an access point with used in conjunction with the Enova DGX 100 Series.
Features
- 4K and Ultra High Definition (UHD) Support – Experience high-quality video resolution for 4K devices.
- Only One Cable – Receive audio and video while passing control, Ethernet and power over one twisted pair cable
- SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
- Native NetLinx® Control Everywhere - Control connected destination devices using the built-in IR and RS-232 ports
- Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
- HDCP Compliant
- DXLink Direct Connection with DXLink Wallplates - When DXLink Wallplates are receiving Power over DXLink from the PS-POE-AT-TC or PDXL-2, they can be connected directly to a DXLink Receiver for a point-to-point solution. Solecis Digital Switchers can also be used in point-to-point applications with a DXLink Receiver.
* AMX only supports the following DXLink Power sourcing devices for the DX-RX: Enova DGX 800/1600/3200/6400 Digital Media Switcher, Compatible Enova DVX All-In-One Presentation Switcher (Enova DVX-2150HD or DVX-2155HD), PS-POE-AT-TC High Power PoE Injector, PDXL-2 Power over DXLink Controller, Solecis SDX-510M-DX and SDX-514M-DX. AMX only supports the use of these approved Power over DXLink solutions. Other third party power supplies or non-compatible standard PoE solutions may damage the DXLink equipment. The DXLink HDMI 4K RX can also be powered via the included desktop power supply (ENERGY STAR® qualified) with power cord.
| Dimensions (HWD) | 1" x 8 3/4" x 5 3/16" (2.54 x 22.22 cm x 13.18 cm) |
| Twisted Pair Cable Type & Length | Shielded Cat6A and Cat7; Up to 262 ft. (80 m) for full 4K format support; Up to 328 ft. (100 m) for 1080p and below format support |
| USB (HID) | USB Type A Connector ("Device") |
| Front Connectors | Advanced Configuration Interface*: USB Mini-B Connector (*This feature will be available upon release of a future firmware update) |
| Back Connectors | Local Power: 2.1 mm DC Power Jack; DXLink Input: RJ-45; ICSLAN/Ethernet Port: RJ-45 Connector, TCP/IP Port (ICSLAN 10/100) |
| HDMI | Compatible Formats: HDMI, HDCP, DVI |
| HDMI Resolution Support | Progressive Resolution Support: 480p up to 4096 x 2160 @ 60 Hz* (*Y/Cb/Cr 4:2:0); 4K Resolution Support: 3840 x 2160p @ 24/25/30 Hz through 4096 x 2160p @ 60 Hz, 4:2:0* (*supported by DX-RX-4K when in Bypass Scaling mode) |
| HDMI Audio Support | Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM (Dolby Digital and DTS support up to 48 kHz, 5.1 channels) |
| HDCP | HDCP Compliant |
| Stereo Audio | n/a |
| Power Supply | External, Included: Desktop power supply (ENERGY STAR® qualified): 1 per module; External, Optional: Power can also be supplied by a DXLink Power sourcing device |
| Compatible AMX Products | Enova DGX 800/1600/3200/6400 Digital Media Switchers; Enova All-In-One Presentation Switchers; DXLink Multi-Format/Decor Style Wallplate Transmitters; Solecis Multi-format/HDMI Digital Switcher; High Power PoE Injector; Power over DXLink Controller |
| FG Numbers | FG1010-510 |
WHY BUY FROM US
ENVIRONMENT
Buying refurbished isn’t just a great way to save money but a great way to do your bit for the environment. Optimising the life of electronics provides greater environmental gains to the environment including minimising the impact of eWaste on our planet. Buying refurbished equipment is a sustainable form of recycling. Your purchase has contributed minimising pollutions, limiting the use of raw materials in the manufacturing process and a significant cost saving to you.
- Together we are contributing to making a positive impact on the environment – Thank you!
- You have helped reduce the amount of carbon that is being released into the atmosphere – Thank you!
- You have also helped slow down the rate of consumption of exhaustible resources – The planet thanks you!
OVER 20 YEARS OF EXPERIENCE
With over 20 years experience and over 2 million (and counting) products processed. We have developed an enviable reputation for quality products, first class service and a 'no fuss' approach to assisting customers. We continually strive to improve and grow our range of products and services for our customers. As a result we have evolved over the years to have specialised divisions within the ACT Group of companies
WIDE RANGE OF PRODUCTS
We're not just about computers, from humble beginnings we've grown to include all sorts of IT and commercial equipment. We offer a range of products and services including everything from Desktop Computers, LCD's, Laptops, Tough-books, Laser Printers, Office Multi-function Printers, Commercial Paper Shredders, Printer Plotters, Projectors, Servers, Other Network Equipment, IT Accessories, Toners and much much more.
GREAT SERVICE
We are famous for our service and recognised nationally as one of Australia's largest and most respected suppliers of Ex-Government IT equipment and excess or surplus manufacturers stock. We put you, the customer first. with dedicated customer support agents, you can rest assure that if there is anything you need pre or post sale we are only a message away.
We're not just about computers, from humble beginnings we've grown to include all sorts of IT and commercial equipment! We offer a range of products and services including everything from Desktop Computers, LCD's, Laptops, Tough-books, Laser Printers, Office Multi-function Printers, Commercial Paper Shredders, Printer Plotters, Projectors, Servers, Other Network Equipment, IT Accessories, Toners and much more.
We are famous for our service and recognised nationally as one of Australia's largest and most respected suppliers of Ex-Government IT equipment and excess or surplus manufacturers stock. We stock the world's leading brands which include DELL, IBM, TOSHIBA, ACER, HP and APPLE.
With over 20 years' experience, we are an authorised dealer (License #11912) within the second-hand market. We have developed an enviable reputation for quality products, first class service and a 'no fuss' approach to assisting customers. We continually strive to improve and grow our range of products and services for our customers. As a result we have evolved over the years to have specialised divisions within the ACT Group of companies:
Australian Computer Traders - specialising in retail, business-to-business and export of refurbished IT Equipment. From this location we service customers from all over the world including, Australia, NZ, PNG, Asia and the Middle East with capability to distribute product anywhere in the world. We can supply one item or 40 foot containers...."you choose".
We accept PayPal Only
Shipping Policy
All of our Items are sent out of our East Brisbane Office or Our Warehouse.
Items Bought and Paid for by 11am and generally sent same day.
Returns & Warranty
All Products are covered with a 6 Month RTB Standard warranty unless otherwise stated.
Printer warranty does not cover consumables or mechanical ware and tear.
All products are covered with a 180 days RTB warranty unless specified different
Printer Warranty does not cover consumables or Mechanical Ware & Tear.
Your customer satisfaction is important to us, if you have any issues please Contact us immediately
