1 X IP-BOX 2
1 X LGA52 / 60 a test stand IC Adapter
1 X SPI font (Apple baseband font) Simple Block, a wiring board
1 X EEPROM (apple chips) Simple Block, a wiring board
1 X Battery board
1 X USB data line
interface is introduced
(1) IP_BOX2: expansion and hard disk, hard disk repair, hard disk test (can be used to extract the original hard disk information, write new hard disk information, repair the partition information, etc.)
(2) NAND_Flash: designed for apple hard to read, write, erase, write block, etc
(3) SPI_Flash: suitable for baseband chips for apple to read, write, erase, and other functions; Support thousands of SPI in paragraph word stock; Suitable for iPhone 4 s, iPhone 5 and iPhone 5 c, the iPhone 5 s, etc
Block
(4) the EEPROM: used to block apple EEPROM read, write, erase, etc; Suitable model including the iPhone 6, 6 Plus the iPhone, iPhone, iPhone 6 s Plus 6 s, the iPhone 5 se, etc
(5) the Firmware Upgrade: Firmware updates, instrument used to update the Firmware;
(1) IP_BOX2: expansion and hard disk, hard disk repair, hard disk test (can be used to extract the original hard disk information, write new hard disk information, repair the partition information, etc.)
(2) NAND_Flash: designed for apple hard to read, write, erase, write block, etc
(3) SPI_Flash: suitable for baseband chips for apple to read, write, erase, and other functions; Support thousands of SPI in paragraph word stock; Suitable for iPhone 4 s, iPhone 5 and iPhone 5 c, the iPhone 5 s, etc
Block
(4) the EEPROM: used to block apple EEPROM read, write, erase, etc; Suitable model including the iPhone 6, 6 Plus the iPhone, iPhone, iPhone 6 s Plus 6 s, the iPhone 5 se, etc
(5) the Firmware Upgrade: Firmware updates, instrument used to update the Firmware;
2, expansion, hard disk repair function is introduced:
1) Type options: according to the need to modify the phone models; Choose the corresponding models;
(2) mobile phone message: extraction of hard disk data; Device will automatically identify the hard disk and fill in the information; The user can also according to the information they need to manually enter the corresponding parameters
(3) hard disk data extraction, extraction of the original machine hard disk data, can be appropriate to reduce the user to enter the step; It is more convenient
(4) operating parameters:
I; Erase all content: in the hard disk before operation was carried out on the hard drive clean empty;
II. Print the hard disk bad area information; All NAND character there is a bad area, but it is normal;
III. Heavy build hard disk partition; Different mobile phone; Hard disk partition information is not the same, need to write;
As with the iPhone 6 change hard disk to the iPhone 6 p, need to rewrite the partition information; At this time, the need to beat this hook
If the new hard disk, partition information is empty; Or is unknown, need to write the correct hard disk partition information, need to beat the hook,
This function default box;
IV. Change the hard disk serial number information. The first item (2) the above information written to the new hard disk
V. The boot area double backup; Don't tick, it may lead flash disk error;
3: NAND_Flash apple hard to read, write, erase, write block function
(1) the function buttons:
Test ID: read drive ID, type, capacity and other information
Reading test: print out the word stock internal part of the data information
Read all: read the word stock information and save to your computer
Erase block: according to the NAND start address; Erase the corresponding block of data
Erase all: empty contents
Write block: according to the NAND start address; Write data to the corresponding block
Write all: write the whole word stock information
Stop check: interrupt button
(2) the NAND bus parameter
NAND_Flash modes: according to the different word stock, need to choose a different model
NAND bus clock: this is a read, and write speed
(3) reading test, erase, write blocks of options
NAND starting page address
NAND_Flash_ choice: apple hard disk with multiple choice, such as CE1 and CE2 \ CE3 \ CE4
(4) read the word stock, write a word stock, erase all options
The default; Don't need a door operation; If scrap, lead to read word stock is not complete
3, SPI_Flash (baseband chips to read, write, erase, repair)
(1) options
Reading test: print out the word stock internal part of the data information
Read the code piece: read the word stock data and save to your computer
Write code: write the whole word stock data to the chip
Than is: to compare the data with match in character
Stop check: interrupt button
(2) setting options
EEPROM voltage: according to different types of code, choose the corresponding voltage; Apple's default 3.3 V
Clock (SLC) : according to different types of code, select the clock; Apple's default SLC 100 KHZ
(3) chips type
"CAT24C08C4A" apple's software by default
The starting address and ending address: according to the code model, the software will automatically set, the user is adjustable Generally the default
File options: read, write the file path