Booster pump, gas stove, water heater booster pump, biogas booster pump
It is recommended to choose a pump within 20w for ordinary household stoves! Strongly recommend the latest black durable imported PPS material, which is resistant to corrosion and high temperature, safe and effective!
You can also choose 20W for a single hot stove, a clay pot with less than 4 burners, and a small boiler!
If it is a restaurant commercial five-burner stove, 8-burner stove, 2-burner stove, boiler, and steam engine, it is recommended to choose:
KHC-100 commercial pump!
Suitable for any pipeline natural gas, biogas, gas pressurization
Features
1. Good air tightness: strict air tightness testing is carried out from the air inlet to the air outlet, and no air leakage.
2. Acid and alkali resistance: The passages from the air inlet to the air outlet are all acid and alkali resistant plastic or rubber parts, which can pass weak corrosive gases rich in moisture.
3. Long life: The gas circuit and the circuit are strictly separated, and the electrical life will not be affected by the gas being rich in moisture.
4. Simple structure: there is no external pipeline between the two symmetrical air chambers.
5. Easy to use: You can install and use by yourself with simple tools
The hose is a bit hard in winter, first use a cup of boiling water to soften the hose and connect the connector, then tighten it with a clamp properly, and check that there is no air leakage.
The ambient temperature is -15～40°C. It is not suitable to be exposed to the sun and rain outdoors. It should be worked in a clean environment. The relative temperature of the environment is ≤75%.
Requirements:
The pump is used in a flat position. The connection between the joint and the trachea should have good air tightness. Good contact between the power plug and the socket is required
Product parameters:
Working voltage AC-220v
Working frequency 50 (Hz)
Working power 10 (W)
Pressure 16.0 (kpa)
Load flow ≥ 12 (70 meters) (L/min)
Vacuum -16.0 (kpa)
Working flow ≥26(L/min)
Product weight 1.3 (kg)
Features of biogas booster pump:
This product is a booster pump designed specifically for biogas (it can also be applied to pipelines with too low pressure of natural gas). It can improve the phenomenon of insufficient biogas pressure, make biogas burn more fully, and have greater firepower. Due to the negative pressure of the pump, Make the biogas digester more fully produce gas, it is widely used in various types of biogas digesters and long-distance transportation of biogas!
Good airtightness: The passage from the air inlet to the air outlet is made of acid and alkali resistant plastic or rubber parts, which can pass weak corrosive gases rich in water vapor, and conduct strict air tightness testing from the air inlet to the air outlet , No air leakage, no leakage under 6.8KPa pressure!
Requirements for use: The pump can be used horizontally or vertically, the joint and the air pipe connection should have good air tightness, a booster pump can only use one gas appliance (cannot drive multiple gas appliances at the same time), power plug Good contact with the socket is required. After the pump is powered on, it is working normally!
Note: Do not collide, do not allow foreign objects to enter the pump, turn off the power when not in use, do not idling, otherwise it will damage the air pump, the socket connection should be far away from the fire source, if the air outlet pressure is too small, please check whether the air pump is blocked. Repairs need to be carried out by professionals!
It is recommended to choose a pump within 20w for ordinary household stoves! Strongly recommend the latest black durable imported PPS material, which is resistant to corrosion and high temperature, safe and effective!
You can also choose 20W for a single hot stove, a clay pot with less than 4 burners, and a small boiler!
If it is a restaurant commercial five-burner stove, 8-burner stove, 2-burner stove, boiler, and steam engine, it is recommended to choose:
KHC-100 commercial pump!
Suitable for any pipeline natural gas, biogas, gas pressurization
If it is a restaurant commercial five-burner stove, 8-burner stove, 2-burner stove, boiler, and steam engine, it is recommended to choose:
KHC-100 commercial pump!
Suitable for any pipeline natural gas, biogas, gas pressurization
Features
1. Good air tightness: strict air tightness testing is carried out from the air inlet to the air outlet, and no air leakage.
2. Acid and alkali resistance: The passages from the air inlet to the air outlet are all acid and alkali resistant plastic or rubber parts, which can pass weak corrosive gases rich in moisture.
3. Long life: The gas circuit and the circuit are strictly separated, and the electrical life will not be affected by the gas being rich in moisture.
4. Simple structure: there is no external pipeline between the two symmetrical air chambers.
5. Easy to use: You can install and use by yourself with simple tools
The hose is a bit hard in winter, first use a cup of boiling water to soften the hose and connect the connector, then tighten it with a clamp properly, and check that there is no air leakage.
The ambient temperature is -15～40°C. It is not suitable to be exposed to the sun and rain outdoors. It should be worked in a clean environment. The relative temperature of the environment is ≤75%.
Requirements:
The pump is used in a flat position. The connection between the joint and the trachea should have good air tightness. Good contact between the power plug and the socket is required
1. Good air tightness: strict air tightness testing is carried out from the air inlet to the air outlet, and no air leakage.
2. Acid and alkali resistance: The passages from the air inlet to the air outlet are all acid and alkali resistant plastic or rubber parts, which can pass weak corrosive gases rich in moisture.
3. Long life: The gas circuit and the circuit are strictly separated, and the electrical life will not be affected by the gas being rich in moisture.
4. Simple structure: there is no external pipeline between the two symmetrical air chambers.
5. Easy to use: You can install and use by yourself with simple tools
The hose is a bit hard in winter, first use a cup of boiling water to soften the hose and connect the connector, then tighten it with a clamp properly, and check that there is no air leakage.
The ambient temperature is -15～40°C. It is not suitable to be exposed to the sun and rain outdoors. It should be worked in a clean environment. The relative temperature of the environment is ≤75%.
Requirements:
The pump is used in a flat position. The connection between the joint and the trachea should have good air tightness. Good contact between the power plug and the socket is required
Product parameters:
Working voltage AC-220v
Working frequency 50 (Hz)
Working power 10 (W)
Pressure 16.0 (kpa)
Load flow ≥ 12 (70 meters) (L/min)
Vacuum -16.0 (kpa)
Working flow ≥26(L/min)
Product weight 1.3 (kg)
Features of biogas booster pump:
This product is a booster pump designed specifically for biogas (it can also be applied to pipelines with too low pressure of natural gas). It can improve the phenomenon of insufficient biogas pressure, make biogas burn more fully, and have greater firepower. Due to the negative pressure of the pump, Make the biogas digester more fully produce gas, it is widely used in various types of biogas digesters and long-distance transportation of biogas!
Good airtightness: The passage from the air inlet to the air outlet is made of acid and alkali resistant plastic or rubber parts, which can pass weak corrosive gases rich in water vapor, and conduct strict air tightness testing from the air inlet to the air outlet , No air leakage, no leakage under 6.8KPa pressure!
Requirements for use: The pump can be used horizontally or vertically, the joint and the air pipe connection should have good air tightness, a booster pump can only use one gas appliance (cannot drive multiple gas appliances at the same time), power plug Good contact with the socket is required. After the pump is powered on, it is working normally!
Note: Do not collide, do not allow foreign objects to enter the pump, turn off the power when not in use, do not idling, otherwise it will damage the air pump, the socket connection should be far away from the fire source, if the air outlet pressure is too small, please check whether the air pump is blocked. Repairs need to be carried out by professionals!
Packing：1PC
Warranty period: 120 days
