Welcome
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Product Description
Specifications:
Type: LED Whip
Condition: Brand new
Certification: CE, FCC, ROHS
Color: RGB
Length: 4FT (120cm)
Voltage range: DC 9-15V
LED Lifespan: 30,000 hours
Placement on Vehicle: Front, Rear, Left, Right
Control Way: App/Remote control
Compatibility: ATV, UTV, off-road vehicles
Note:
1. The remote control battery is not provided. (battery type: 3V CR2025);
2. Before installation, check whether the hole size in the position to be installed is appropriate (the optimum hole size is 12.5 mm, it is recommended to use the professional whips light bracket);
3. The added section cannot be used alone;
4. After connection, the added section can't be in sync automatically in running light mode. You need to reset the APP.
5. After you complete the connection, you need to install the sealing rubber cover on the top of the whip light pole.
Package Includes:
2 x 4FT LED whip lights (2x 60cm with single base + 2x 60cm added section)
1 x Remote control (without battery)
1 x Installation Kit
2 x Flags
Features:
DUAL CONTROL WAYS: The whip light can be controlled by the remote control or APP Bluetooth, 3000 colors, 300 changing modes, multiple brightness levels and flashing speeds for your choice, and can realize the display effects of chasing, flowing water, magic color, etc. Make you the center of attention and make you safer on the road.
STATUS INDICATOR LIGHT: Bevinsee LED whip lights can be used as signal lights, one wire controls two whip lights, and can simultaneously complete different indicator lights for the left turn, right turn, braking, and reversing, which is beautiful and safe.
DIY SPLICING DESIGN: One whip light has a total length of 120cm (4FT) and is assembled from a 60cm whip light with single base and a 60cm detachable whip light added section. You can install it in combination as you wish.
EASY INSTALLATION: Unique base wiring design, easier to route and disassemble. You just need to install the whip light in the 12.5mm hole, then connect the base wire and whip light, and finally power on. Done in less than 10 minutes. (Please refer to the installation instructions or installation video)
ROCK SOLID PERFORMANCE: These RGB LED whip lights are wrapped in EVA transparent heat shrink tube and high toughness silicone, which can be protected from sand, dust, rain, oxidation, waterproof, and shockproof, which improves the durability of this whip light and protects it from mechanical damage.
UNIVERSAL FITMENT: Bevinsee RGB whip lights are perfect for UTV ATV accessories, such as Polaris RZR, Can-Am Maverick, etc. See the below compatibility for details.
FAQ Q1: Will the bulbs suitable for my vehicle? A:1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above. 2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand. 3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit! Q2: What if I encounter a dashboard error message or flickering? A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem. Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A:Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor. Q4: How to get the best light output? A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page. Q5: What should I do if there is a quality problem? A: Please send ebay message to us, we will solve any problems for you as soon as possible. Q6: The bulbs doesn't fit my vehicle. A:1. The bulbs size maybe wrong, pls double check before order. 2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you. Q7: Warrning about polarity A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect. DISCLAIMER
Disclaimer: Bevinsee parts are not sponsored or endorsed by, or
affiliated with the brands its parts fit, including Porsche, Subaru,
Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet,
GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury,
Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi,
Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo,
Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn,
Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram,
Rover, Skoda, Harley, Mini, Smart, Scion, Renault, Seat, Peugeot,
Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat,
Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special
Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic
Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna,
Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli,
Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
![]() Shipping Policy
Return & Refund
Feedback
![]() About Item
Customer Satisfaction
|