Untitled Document

Metric Coarse M 5 x 0.8 5 mm Hand Taps Serial Form HSS-E Part Cobalt

Taps are to din 352 HSS-G Tolerance ISO2/6H


Suitable for abrasive Materials

with High Cutting Ability for

Steels up to 1200N/mm2 


 

This form of Hand Tap consists of 3 taps for Metric Coarse threads made up of a Roughing Tap a Mid Rougher and a Finishing tap (see below for more information).

 

This form of tap is ideal for tougher materials because the thread is formed in stages as opposed to NON serial taps which form the thread in one pass and use the conventional Taper Second and plug.

 

 

 

The roughing tap which takes out half the
thread area is marked with a ring on the shank for identification.
The Mid-Rougher which takes out to 75% of the area of the thread is
  marked with two rings on the shank. Only the plain shanked
Finish tap cuts SIZE.

#57334

Metric Coarse M 5 x 0.8 5 mm Hand Taps Serial Form HSS-E Part Cobalt Taps are to din 352 HSS-G Tolerance ISO2/6H Suitable for abrasive Materials with High Cutting Ability for Steels up to 1200N/mm2  This form of Hand Tap consists of 3 taps for Metric Coarse threads made up of a Roughing Tap a Mid Rougher and a Finishing tap (see below for more information). This form of tap is ideal for tougher materials because the thread is formed in stages as opposed to NON serial taps which form the thread in one pass and use the conventional Taper Second and plug. The roughing tap which takes out half the thread area is marked with a ring on the shank for identification. The Mid-Rougher which takes out to 75% of the area of the thread is   marked with two rings on the shank. Only the plain shanked