★.Top Quality: This tankless water heater is a gas water heater - LPG (liquefied propane gas). It features rust-proof stainless steel shell, and it is a high-temperature copper water device.

★.Easily Control: This water heater features LED display, rotating the gas supply and water output control knobs, easily adjust the hot water temperature. A summer/winter mode is also provided to select energy saving methods.

★.Multiple Protections: Features multiple protections to be safe to use, such as overheating protection up to 75℃, low water flow protection, etc. It can also be started under low water pressure and comes with a shower kit.

★.Wall-mounted Design: Lightweight, tankeless, space-saving.

★.Wide Application: Certified by CE, fast heating, suitable for bathroom shower, hand washing or pet shower, sink cleaning. Provide you with constant hot water, especially in winter or cold places. Enjoy a comfortable shower at any time.


Specificaiton: 
Gas Water Heater 18-LPG
Model: JSD18
Nominal Heat Input (Q): 36kw
Minimum Heat Input (Q): 14.8kw
Rated Hot Water Producing Capacity (L/min At=25K): 18
Rated Voltage (V dc): 8
Appliance Type: B11BS
Certification Number: 0314585
Gas Type: LPG LNG
Gas Pressure ( mbar): 28-29
Nominal Useful Output(kW): 10.2
Max Water Pressure( bar): 10
Min Water Pressure(bar): 0.5
Tip: the product requires 2 D size batteries(not included)

Gas Water Heater 16-LPG
Model: JSD16
Nominal heat input (Q): 32kw
Minimum heat inPut (Q): 12.8kw
Rated hot water producing capacity (L/min At=25K): 16
Rated voltage (V dc): 7
Appliance type: B11BS
Certification number: 0314585
Gas type: LPG LNG
Gas pressure ( mbar): 28-29
Nominal Useful Output(kW): 10.2
Maximum water pressure( bar): 10
Minimum water pressure(bar): 0.5

Gas Water Heater 12-LPG
Model: JSD12
Nominal Heat Input (Q): 24kw
Minimum Heat Input (Q): 10.8kw
Rated Hot Water Producing Capacity (L/min At=25K): 12
Rated Voltage (V dc): 6
Appliance Type: B11BS
Certification Number: 0314585
Gas Type: LPG LNG
Gas Pressure ( mbar): 28-29
Nominal Useful Output(kW): 10.2
Max Water Pressure( bar): 10
Min Water Pressure(bar): 0.5

Gas Water Heater 10-LPG
Model: JSD10
Nominal Heat Input (Q): 20kw
Minimum Heat Input (Q): 8.8kw
Rated Hot Water Producing Capacity (L/min At=25K): 10
Rated Voltage (V dc): 5
Appliance Type: B11BS
Certification Number: 0314585
Gas Type: LPG LNG
Gas Pressure ( mbar): 28-29
Nominal Useful Output(kW): 10.2
Max Water Pressure( bar): 10
Min Water Pressure(bar): 0.5
Gas Water Heater 8-LPG
Model: JSD8
Nominal heat input (Q): 16kw
Minimum heat inPut (Q): 6.8kw
Rated hot water producing capacity (L/min At=25K): 8
Rated voltage (V dc): 4
Appliance type: B11BS
Certification number: 0314585
Gas type: LPG LNG
Gas pressure ( mbar): 28-29
Nominal Useful Output(kW): 10.2
Maximum water pressure( bar): 10
Minimum water pressure(bar): 0.5

Packing List:

1 x Wate Heater

Note:Gas water heaters must be installed outdoors! Under normal circumstances, the gas water heater is installed in the kitchen, and it is forbidden to install it in the basement, living room, bedroom, cabinet, etc. If the user wants to install it on a balcony or bathroom, it must be ensured that: The space is well ventilated.

The space where the water heater is installed must be well ventilated, and no flammable, explosive or corrosive items can be placed around the installation. If the ventilation effect of the space is relatively poor, or there is no exhaust system installed, it is not recommended to install a gas water heater.

There is generally no open flame under the gas water heater, and the horizontal distance between the gas water heater and the stove must be kept at least one meter, so that the gas water heater will not be damaged. In addition, it is not advisable to install electrical equipment, gas pipes, open pipes, etc. above the gas water heater, because the temperature of the gas water heater is generally high during operation, and it is easy to damage these devices.

Gas water heaters need a certain amount of gas pressure to work properly. During the installation process, the pressure controller needs to be installed and adjusted to ensure that the gas pressure will not be too high or too low, so as not to affect the normal operation of the gas water heater. (2800Pa)
The gas water heater needs a certain water pressure to work normally, and the water pressure is too small (0.025-0.08mpa) and the machine cannot work
Pay attention to the height, neither too high nor too low. Because if it is installed too high, the water pressure will decrease and it will be difficult to enter the water. However, if the installation is too low and the water pressure is too high, it will cause damage to the water heater. Generally speaking, the distance from the ground needs to be about 1.2-1.4 meters, and the water pipe should be about 1.8 meters from the ground.
The installation of gas water heaters needs to be carried out by professionals. During the installation process, in order to ensure that the gas pipeline and the flue are firmly connected, the gas valve must be closed and measures to prevent gas leakage must be taken. After the installation is completed, a strict air tightness test is required to ensure that the gas does not leak.
When using gas water heaters, care should be taken to prevent burns, and children and the elderly should stay away from gas water heaters to avoid accidents.
When using a gas water heater, avoid using hot water for a long time, which will not only waste energy, but also easily lead to aging and damage to the gas water heater. It is recommended to control the usage time when using the water heater.
During the use of the gas water heater, attention should be paid to the maintenance of the gas water heater, and the scale, dust and other debris on the gas water heater should be cleaned regularly to ensure the normal service life of the gas water heater.
Regularly check the pipes of the gas water heater. If there are signs of aging and cracking, the new tube should be replaced in time to prevent accidents.