The flagship Crestron 2-Series control system processor, featuring numerous built-in control ports, a 3-slot expansion card cage, optional Ethernet, and a full-feature front panel.

 

Processor

                CPU       32-bit Freescale ColdFire® Microprocessor

Memory

                SDRAM 64 MB

                NVRAM 256 KB

                Flash      4 MB

                Compact Flash   expandable up to 2 GB (not included)

Operating System

                Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+®

Ethernet

                With C2ENET-1  10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications

                With C2ENET-2  All above features plus: built-in firewall, router, and network address translator (NAT)

Y-Bus Connectors & Expansion Slots

                40 Mb/s parallel communications;

Internal backplane for integrated control ports and Y-Bus expansion slots

                COM A - F            (6) DB9 male, bidirectional RS-232/422/485 ports;

Up to 115.2k baud;

Hardware and software handshaking support;

Ports C-F support C2N-NPA8 Network Poll Accelerator

                INFRARED-SERIAL OUTPUT A - H (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;

IR output up to 1.2 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;

Individual signal generator per port allowing simultaneous firing of all ports

                I/O Versiports 1 - 8           (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND);

Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;

Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;

Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;

Programmable 5 Volts, 2k ohms pull-up resistor per pin

                RELAY OUTPUT 1 - 8        (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;

Rated 1 Amp, 30 Volts AC/DC;

MOV arc suppression across contacts

                Expansion Slots (3) Y-Bus expansion slots;

Accept all Y-Bus control cards

Z-Bus Expansion Slots

                300 Mb/s parallel communications;

Backplane for Z-Bus expansion slots

                Expansion Slot   (1) Z-Bus expansion slot;

Accepts all Z-Bus control cards

Additional Connectors

                COMPUTER        (2) DB9 female;

Front and rear panel RS-232 computer console ports

                NET        (1) 4-pin 5mm detachable terminal block;

Cresnet port, Master/Slave selectable;

Expandable via C2N-NPA8 Network Poll Accelerator

                100-250V~2.3A

50/60 Hz              (1) IEC Socket;

Mates with removable power cord, included

                Ground (1) 6-32 screw, chassis ground lug

Reset Buttons

                HW-R    Hardware reset (reboots the control system)

                SW-R     Software reset (restarts the SIMPL program)

Menu Buttons

                FUNCTIONS        (6) Up to 6 dynamically assigned functions based upon current menu

                MENU   (1) Returns the LCD display to the MAIN menu

                ∧, ∨        (2) Scroll up or down through any list displayed in the LCD display

                BKLT       (1) Toggles through 4 levels of backlight intensity for the LCD display

                Refer to the Operations Guide for additional menu functions

LCD Display

                (2) lines, (40) characters per line;

Reverse mode (yellow and black) backlit LCD;

Displays system information, configuration menus, and custom programmable user functions

LED Indicators

                PWR      (1 green) Indicates AC power supplied to unit

                NET        (1 yellow) Indicates Cresnet bus activity

                MSG      (1 red) Indicates control system has generated an error message

                LNK A    (1 red) Indicates a valid connection on LAN port A

                ACT A    (1 red) Indicates activity on LAN port A

                LNK B    (1 red) Indicates a valid connection on LAN port B

                ACT B    (1 red) Indicates activity on LAN port B

                COM A - F

(TXD, RXD, RTS, CTS)       (24 red) Indicate activity on each respective COM port

                IR-SERIAL A - H   (8 red) Indicate activity on each respective IR/Serial port

                INPUT-OUTPUT 1 - 8        (8 red) Indicate activity on each respective I/O Versiport

                RELAY 1 - 8          (8 red) Indicate contact closure at each respective relay port

                SLOT 1 - 3            (3 red) Illuminates to indicate presence of a card in the respective expansion slot; extinguishes momentarily to indicate activity

Power Requirements

                Main Power        2.3 Amps, 100-250 Volts AC, 50/60 Hz

                Available Cresnet Power