The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load.
Main technical parameters:
Input supply voltage:6V-28V DC
The maximum output power: 80W
The maximum continuous output current :3A
Duty Cycle adjustable:5%-100%
3A 12-36V
Input voltage: DC12V - 36VSustained current:3A,max.6A(Need to add a cooling fan when max. current)PWM Duty Cycle:0 -100%PWM Frequency:500KHzMaterial: Plastic, metalSize (L*W*H):56mm*36mm*22mm
10A 12-40V
Model: CCMHCWorking Voltage: DC 12V - DC 40V.Control Power:0.01 - 400W.Current: Rated 8A, Max 10A.Static Current:0.02 A ( Standby ).PWM Duty Cycle:10% -100%.PWM Frequency:13 KHz.Material: Plastic, metal.Size (L*W*H): 6cm x 5.5cm x 2.8cm/2.36"x 2.16"x1.10"(approx)4 hole diameter: 3 mm(approx)
20A 10-60V
Operating voltage: DC 10V-60VOutput Current: 0 to 20A.Frequency:25KHz.Continuous power: Max 1200WSpeed range: Motor zero speed to maximum motor speedThe maximum current up to 20A radiator or heat required to increase the fanMaterial: Plastic, metalSize (L*W*H):76mm*44mm*26mm
15A 6-90V
Control the speed of a DC motor with this controllerHigh efficiency, high torque, low heat generatingWith reverse polarity protection, high current protectionWorking Voltage: DC 6V - DC 90VControl Power: 0.01 - 1000W (Maximum current 15A)Static Current: 0.005 A ( Standby )PWM Duty Cycle: 0% -100%PWM Frequency: 15 KHzSize (L x W x H ): Approx. 64 x 59 x 30 mmMaterial: Plastic, metal
30A 6-60V
Input Voltage: DC6V-60VOutput Voltage: Linear with load(voltage drop at motor 2 terminals )Output Current: 0A-30AContinuous Current: <20ASpeed Range: 0% to 100%(variable)Regulation Method: Potentiometer(Linear)Regulation Type: Regulating Current(cannot be used as a voltage regulator)Control Frequency: 15KHz(pulse width)Wiring Type: Screw terminalRotary Knob: 100K with switch(270°)Size: 75 x 56 x 28mm / 2.95 x 2.2 x 1.1"
10000W AC220V
Operating Voltage: AC 220VMaximum Power: 10000WVoltage regulation: 10-220VMax Current: 100ADimension (Lx W): Approx. 9.8 x 5.5cm / 3.86 x 2.17"
10-60V
VCC positive supply 10-60V, be sure to set before energizing voltage adaptationGND Negative , if you want to reduce the external interference shielding box connected to terminals or here at the cathode connected to the power supplyM+ Motor positiveM- motor negativeLength: 9.5cm width: 7cm height: 3.5cm Length of line: 40cm
Control port :
5V: driver board internal 5V power supply, the output capacity of less than 100mA, with potentiometer mode is recommended only to use , do not drive other circuits
PWM: external PWM control signal input level range ,3-20V , 2mA current requirements ;
ADJ: external 0-5V or 0-10V control signal input
GND: ground control signals , such as the shield shell is not allowed to pick pick here is also not allowed in this place other circuits connected GND,
DOWN: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
UP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
STOP: control signal, the internal coupler control signal and GND effective turn ( optocoupler turns on, can also be used microcontroller , NPN switch control )
3A 80W PWM
Input voltage: DC6V-28VMaximum current: 3APotentiometer with switch functionSize: 32mm * 50mm * 15mmCable length:20cm
3A 80W 1203B PWM
- Color: As the pictures show.- Material: Metal.- Size: 5 * 3.2 * 1.5cm.- The input power range is DC6-28V.- Control the forward or reverse direction and the stop of DC motor by switch.- Potentiometer with switch function.- The switch cable length 15cm.Warning: Do not reverse positive and negative power loads. This will damage the controller!
Package Included:
1PC*Motor Speed Control Switch