Updated Gledopto ZigBee 3.0 MIX RGB+CCT LED Strip Controller DC 12V 24V fr Alexa
Please kindly note that our zigbee devices(Zigbee/Plus/Pro version Products) require related zigbee gateways.
This Controller is RGB+CCT, RGB Color and White Light can be Mixed. -When the color loop moves at the edge on app, only the the RGB light turns on. -When the colo rloop moves to the mid on APP, both the RGB lightand white light turn on together.
Input Voltage: DC12V-24V Out Max Current: 6A/CH Total Out Current: 15 A Max. Load Power:180W(12V) / 360W(24V) Remote Distance:10~15 meters Connecting mode: common anode Controled Method:ZIGBEE ZLL Connection Mode:APP Control. Material:ABS Static Power consumption: <1W Size: L3.54 in*W1.9 in*H0.98 in Wire Connection: 1. Please prepare the cable like picture P1 and strip the isolation to 9-10 mm. The cable cross-section must be between 0,33 and 2,08mm⊃2;(AWG22-14). 2. Now push down the terminal with a screwdriver and put in the cable. 3. Take the screwdriver away and the cable is connected with the terminal. Connection with Gateway: 1. Connect the LED product to the controller see section "wire connection". 2. Start the device searching on the ZigBee Light Link Gateway, it could take some time. If the Gateway does not find the device, plug power off/on or make a reset. 3. The Gateway found your device and you can assign it to the different rooms/zones/groups. 4. Now you can use the device. Reset: 1. Switch on your device. 2. Now switch off and on within 2 seconds. 3. Repeat off/on four times. 4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times. For RGBW/RGBWW devices you will find two SSIDs. One for white/warmwhite, the other for RGB. **The Osram Gateway supports only one SSID, with the RGBW/RGBWW device it find only RGB. Package include: 1 x Zigbee Strip Controller 1 x instruction book |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
AA
