Phillips Head Metal/Rubber Crokinole Adaptor Kit (8 Screws + 12in Rubber)
Crokinole Screw size: #20 x 1" Screws. See video below for how this all works! And HERE is a thread on BGG discussing the pros/cons of rubber vs. wooden pegs. Looking for other options? We have Yellow Zinc Phillips Head or Brass Flat Head Sets if you prefer!
Instructions: Carefully cut 8 uniform ¾ inch lengths of tubing and push then onto the screws. Next, remove the wooden posts and screw in the metal posts with attached tubing about ¼ - ½ inch until tubing is flush with playing surface. Screws are slightly larger than the holes to allow for a nice grip yet not damage the holes should wood peg reinstallation be desired. Do not rest anything on the screws as undue stress can damage the existing holes. For permanent wood peg installation simply use a small amount of wood glue.
Note these are only certified to work with Mayday Crokinole boards, our 8 peg holes are a #20 size hole and these screws MAY be too large for other brands.