Trek's Removable Integrated Battery (RIB) is a great feature for many riders. For others, it's just unnecessary weight and a source of rattling. This bracket is for the second type. 

There are 3 different Versions available:

- For Standard / Non Smart Battery

- For Smart Battery - comes with the Cover Holder (white print on picture). It will be delivered in black color. For mounting, you will need the two screws from the Alu Battery Cover (silver). I'll add the black screw. While it is not the same thread as the original one, it worked for me and you can also revert back to the original one.

- For Standard / Non Smart Battery when mounting a 500Wh Battery instead of a 625Wh. If you are not using my Battery Cover Replacement, you will need to shorten the bottom mechanical guide from the standard Alu cover for this bracket. 

You can identify the system by the App you are using. The eBike Flow app is for the SmartSystem eBike Connect App for the Standard System. 

All kits come with the required screws, washers and a key hole closer (also 3D printed).

After several test, finally found a solution to compensate the production tolerances of the Rail. The bracket provides the option to adjust in all 3 dimensions in the same range as the original Battery Lock.

It's Printed with high strength black Prusament PC Blend Filament.

Please check my other listings for the Battery Cover replacement to further tune the Battery system weight