Description:

1. The audio signal transmitter uses the QPSK digital modulation scheme with the very low delay audio codec, and the sound quality can reach the Hi-Fi level.

2. A set of transmitters can be connected to multiple sets of receivers at the same time. In the UHF band, the transmission distance is better than the 2.4 ghz band.

3. It can be applied to electronic musical instruments, MP3, mobile phones, televisions, tablet computers, radio subwoofs, background music in public places, stage radio, etc.

Pairing Function:

1. This product, if it is 1 transmitter and 1 receiver, is tuned in the factory and can be used immediately.

2. If it is a launch, multiple reception, first use, must match. A set of transmitters can be combined with N (N> 999) sets. After pairing is complete, both the transmitter and receiver parameters save the last pairing parameter, and no link operation is required at any time.

Pairing Manual:
1. First on the transmitter pair key to unlock after 2 seconds and let the transmitter the pairing state (the transmit will always send the pairing request).

2. Press the receiver pairing key to the receiver after 1-2 seconds, and the receiver will enable the pairing. After the link is successful, the receiving indicator will flicker three times. After the pairing is complete, the receiving opportunity will automatically pull out of the link state and enter the normal receive mode.

3. If there is a "1 transmitter multi receiver" request, then do not let the emission stop, continued in the matching state, in the same way by matching the other receiver, when all recipients are paired, the transmiter can manually exit pairing state, short press on the button to the linked state, linked.

Note:
Allows 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture can not show the actual color of the item. Thank you for your understanding.

Using Digital modulation technique，working in the UHF band, high sensitivity and high anti-jamming capability.
After completing the pairing, One transmitter can be connected by multiple receivers at the same time. If more than one receiver is needed, please contact customer service.

Tips: If only one transmitter and one receiver are needed, Users can use them directly without re-performing the pairing operations, because in the factory test session, the transmitter and receiver have been paired.

Sepcifications:

What's in Box?

• 1 x Transmitter
  
• 1 x Receiver
  
• 2 x 3.5 Audio Cables