Crestron DM-RMC-100 DigitalMedia Room Controller | Description | Good Condition Tested and Guaranteed Working. This unit has been pulled from a working environment and functions as intended.
What's Included: 1x Crestron DM-RMC-100 DigitalMedia Room Controller Does not include any additional cables, parts or accessories
Specifications: Video: Input Signal Type: DM CAT (DigitalMedia over twisted-pair copper wire) Output Signal Types: HDMI, DVI[2] Formats: HDMI w/Deep Color & 3D, DVI, HDCP content protection support Input Resolutions, Progressive: 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock Input Resolutions, Interlaced: 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock Output Resolutions: Matched to input
Audio: Input Signal Type: DM CAT Output Signal Type: HDMI Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, Up to 8ch PCM
Communications: DigitalMedia: DM CAT, DMNet, HDCP management, EDID format management, CEC Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP USB: Supports USB HID class devices
Connectors – Bottom: SENS: (1) 2-pin 3.5mm detachable terminal block; Digital/contact closure sensing input; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k Ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band HDMI: (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[2] USB: (1) USB Type A female; USB host port for connection of a mouse/keyboard or other USB HID-compliant device RELAY 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts COM: (1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support IR 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
Connectors – Rear: LAN: (1) 8-wire RJ45 female; 10Base-T/100Base-TX Ethernet port DM INPUT, D & M: (1) DM CAT input composed of (2) 8-pin RJ45 female, shielded; Connects to DM CAT output of a DM switcher, transmitter, or other DM device via DM-CBL cable[1] DM Input, 24 A B G: (1) 4-pin 3.5mm detachable terminal block, DMNet port; Connects to DMNet port of a DM switcher, transmitter, or other DM device via DM-CBL cable[1]
DM Cable Length: Cable Type: DM-CBL DigitalMedia Cable:
Maximum length without, between, before, or after repeaters: 200 ft (60 m) for 720p, 1080i, 1080p24 200 ft (60 m) for 1024x768 @75Hz 150 ft (45 m) for 1080p60 150 ft (45 m) for 1280x1024 @75Hz 150 ft (45 m) for 1920x1200 @60Hz 125 ft (38 m) for 1600x1200 @60Hz 50 ft (15 m) for 1080p60 Deep Color
Maximum total length using up to 2 repeaters: 450 ft (137 m) for 720p, 1080i, 1080p24 450 ft (137 m) for 1024x768 @75Hz 450 ft (137 m) for 1080p60 450 ft (137 m) for 1280x1024 @75Hz 450 ft (137 m) for 1920x1200 @60Hz 375 ft (114 m) for 1600x1200 @60Hz 150 ft (45 m) for 1080p60 Deep Color
Controls & Indicators: PWR: (1) green LED, indicates operating power supplied via DMNet DM LINK: (1) green LED, indicates DM link status VIDEO: (1) red/green dual-color LED, indicates video signal presence and lock status CNTRL: (1) red/green dual-color LED, indicates Ethernet connection and control system communication status SETUP: (1) red LED and (1) miniature recessed pushbutton, for Ethernet setup LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
Power Requirements: DMNet Power Usage: 6 Watts (0.25 Amps @ 24 Volts DC)
Environmental: Temperature: 41° to 104°F (5° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: 21 BTU/Hr
Enclosure: Chassis: Metal, black finish Mounting: Mounts to a 2-gang electrical box, 4" square box, or 1-gang UK (BS 4662) electrical box |
|
Payment
Payment via PayPal is expected within 2-days after the winning bid.We only accept bids from US bidders with confirmed PayPal addresses and only accept PayPal as the form of payment.
Returns
Items sold as New, Tested and/or Working may be returned within 30 days of receiving if you are not satisfied with your purchase. Restocking fee may apply. Buyer is responsible for return shipping costs.
Please review all photos carefully as they are part of the description per eBay policy.
Shipping
ARG-Tech directly only ships to the United States. All international shipments are processed through eBay's Global Shipping Program.
We take pride in packing items carefully to ensure safe arrival. We ship promptly, usually same or next day after PayPal confirmation.
If you have any special requirements or questions regarding shipping, please contact us before buying.
Our business hours are Monday – Friday 7AM-4:30PM EST
|
| Thanks for viewing!
Please check out our other items!
| |
|