Technical data:

Working voltage: 230V

Silent current: <5MA

Maximum current: 10A

Maximum load: 300 W

RF frequency: 433 MHz

Pen: NO-COM-NC

Working temperature: -30~+80

Reception sensitivity: >97dbm

Quantity of storage remote controls: 20 pieces

Supported coding: 1527 learning code and 2262 fixed code

RF operating mode: ASK superheterodyne radio reception

Reception range: The open space is more than 50 meters

Remote battery: 12V27A (not included) 

Seven major functions: inching, self-locking, interlocking, 2-way inching+2-way self-locking, 2-way inching+2-way interlocking, 2-way self-locking+2-way interlocking, independent 2-way interlocking+independent 2-way interlocking.

Functional description of wiring terminals:

1. (Power zero line input)
2. (NC relay normally closed end) (COM relay common end) (NO relay normally open end)

Learning Code:
1. Inching learning method:
Press the control board code matching button once, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that requires code matching. The control board LED indicator light will flash three consecutive times and the code matching is successful.

2. Self locking learning method:
Press the control board code matching button twice consecutively, and the LED indicator light will flash twice. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash three times consecutively to successfully match the code.

3. Interlocking learning method:
Press the control board code matching button three times continuously, and the LED indicator light will flash three times. After the LED indicator light is on, press the remote control button that requires code matching. The control board LED indicator light will flash three times continuously, and the code matching is successful.

4. Two way jog and two way self-locking learning methods:
Press the control board code matching button 4 times continuously, and the LED indicator light will flash 4 times. After the LED indicator light is on, press the remote control button that requires code matching, and the control board LED indicator light will flash 3 times continuously to successfully match the code.

5. Two way jog and two way interlock learning methods:
Press the control board code matching button 5 times continuously, and the LED indicator light will flash 5 times. After the LED indicator light is on, press the remote control button that requires code matching. The control board LED indicator light will flash 3 times continuously, and the code matching is successful.

6. Two way self-locking and two way interlocking learning methods:
Press the control board code matching button 6 times continuously, and the LED indicator light will flash 6 times. After the LED indicator light is on, press the remote control button that requires code matching. The control board LED indicator light will flash 3 times continuously, and the code matching is successful.

7. Two way interlocking and two way interlocking learning methods:
Press the control board code matching button 7 times continuously, and the LED indicator light will flash 7 times. After the LED indicator light is on, press the remote control button that needs code matching, and the control board LED indicator light will flash 3 times continuously to successfully match the code.

Clear data:
Press the control board code checking button 8 times continuously, and the LED indicator light will flash 8 times. At this time, the LED indicator light will automatically flash 8 times continuously, completing the code clearing and clearing all previously learned remote control key codes.

Explanation of output method:
1. Self locking: Press the same remote control button, press once to turn on the relay, and press again to turn off the relay.
2. Interlock: Press the "A" button on the remote control to turn on the relay, and press the "B" button on the remote control to turn off the relay.
3. Jog: Press the "A" button on the remote control to turn on the relay, release the "A" button on the remote control to turn off the relay. If you keep pressing the "A" button on the remote control, the relay will remain on. When you release the remote control, the relay will turn off.