A set of 4 high quality Locking Wheel Bolts manufactured by Evo - Protect your investment by securing expensive wheels and tyres.

This Locking Wheel Bolt Set is suitable for the following Audi Models with Alloy and Steel Wheels,
PLEASE NOTE this set is designed as replacements, the key WILL NOT fit your current locking bolts.

A1 - 2011 onwards

A2 - 2000 to 2007

A3 - 1995 to 2016

A4 - 1995 to 2016

A5 - All Years

A6 - 1994 onwards

A7 - 2010 onwards

A8 - 1994 onwards

TT MK1, 2 & 3

Evo locking wheel nuts and bolts are supplied with a unique key number, a replacement key can be obtained direct from the Manufacturer (Details Included in box)

They have a very strong 3 pin design. This makes them very secure and hard to remove.

Approved and used by many major Car Companies

Each Bolt has a stainless cap to cover the bolt head, this makes them look like a normal bolt and matches your other wheel bolts.

The key uses a standard 17mm socket

Manufactured to ISO9001 QS9000 Standards.

Important Information

Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.