4U CAR PARTS LTD PRESENTS:
PROFESSIONAL MULTI-SYSTEM CAR DIAGNOSTIC TOOL CR V2.0 (1+9)
FOR MULTI-BRAND VEHICLES (10 VEHICLE CHOICES) +OIL RESET +EPB+BMS+DPF+SAS+ETC+BLD+INJ+OBDII
VIN NUMBER REQUIRED: IF YOU NEED THIS SCANNER FOR A SPECIFIC FUNCTION FOR YOUR
CAR, PLEASE SEND YOUR VIN NUMBER BEFORE BUYING, TO CHECK IF THE FUNCTION
IS AVAILABLE OR NOT! |
iCarsoft CR V2.0 (1+9) is a Professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (10 vehicle choices), please note that once you downloaded a certain software, you cannot change to another one, so please make sure of the exact software that you need before you install to the scanner.) developed by iCarsoft Technology Inc. With a 4.0" TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.
Notice:
The scanner will be shipped without any software, you can download totally 10 software via the update tool for free. Once you downloaded a certain software, you cannot delete it anymore, so please consider carefully which software you need before the installation.
Steps for downloading software:
1, Download the update tool from this webpage:
https://www.icarsoft.com/Page/103.html
Go to the bottom of the webpage and choose option 3:
2, Run the update tool and Connect the scanner to PC via USB cable;
3,Choose the sofware that you need and then click download;
when the installation finish, you can disconnect the scanner from the PC and use it.
Totally you can download 10 software, for example,after you downloaded 2 software, you can only download 8 software in future:
If you want us to install the software for you before shipping, please contact us which software you need, thank you !
Software for choices: (E.g: Fiat/Romeo/Lancia is one software)
1.Benz | 2. BMW | 3. Chrysler | 4.Citroen |
5.Dacia | 6.Daewoo | 7.Fiat/Romeo/Lancia | 8.Ford |
9.GM | 10.Holden | 11.Honda/Acura | 12. Hyundai |
13.Isuzu | 14.Jaguar | 15.Kia | 16.LandRover |
17.Mazda | 18.Mini | 19.Mitsubishi | 20.Nissan/Infinite |
21.Opel | 22.Peugeot | 23.Porsche | 24.Renault |
25.Saab | 26.Smart | 27.Sprinter | 28.Subaru |
29. Suzuki | 30. Toyota/Lexus/Scion | 31. Audi/VW/Skoda/Seat | 32.VOLVO |
For BMW between year 1997-2000, you need to purchase iCarsoft BMW-20 socket for conversion
CR V2.0 (1+9) can work on engine system for chassis 202, 210, 140, 208, 170, 129;
and you need to purchase iCarsoft 38 pin adapter for engine for conversion.
CR V2.0 (1+9) can work on multi-system for chassis 202, 210, 140, 208, 170, 129; and you need to purchase iCarsoft 38 pin adapter for multi-system for conversion.
▪Diagnose Single Brand of most Models (OBDII-16DLC)
▪Full System Diagnosis
▪Support Oil Service Reset
▪Electronic Parking Brake (EPB) system maintenance
▪Battery Management System (BMS)
▪Diesel Particulate Filter (DPF) Regeneration Control System
▪Electronic Throttle Control System (ETC)
▪Steering Angle Sensor (SAS) Calibration
▪ABS Bleeding(some vehicles do not enjoy this function)
▪Injector Coding(some vehicles do not enjoy this function)
▪Read &Clear DTC
▪Read Live Data
▪Support Battery Test
▪Support Data Review and Print
▪Full Speed Upgrade via PC
▪4.0″ TFT LCD, 480*320 Pixels
▪Support Multi-Language
OBDII FUNCTION
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More