PART 1: https://youtu.be/MPDsVqKvvoA?si=VsDlXgiAjYYDj5Or
PART2:https://youtu.be/OrjjCl7Esbs?si=4Ns8lm2EjR4vtOPI
Introducing Eclipson's P-51D Mustang 3D Printed Kit. An Iconic Legend Reimagined! Immerse yourself in the legacy of the North American P-51D Mustang with our meticulously crafted 3D printed version. This kit includes Eclipson's fully functional, robust, and 3D printed retractable landing gear system, eliminating the need for costly commercial aluminum alternatives. Furthermore, Eclipson's P-51D boasts a design meticulously optimized for LW-PLA printing, resulting in a flawless fusion of form and function. The P-51D Mustang's timeless beauty and historical significance now intertwine with modern technology and innovation, allowing you to savor the thrill of flight while redefining the boundaries of 3D printed aircraft. Embark on an extraordinary journey as the Eclipson P-51D Mustang 3D Printed Kit takes you skyward, where history and innovation converge in perfect harmony.
PRINTED WEIGHT |
440gr | WING SPAN | 1100mm |
TAKE OFF WEIGHT | 850gr | WING SURFACE | 21dm2 |
STALL SPEED | 26kmh | WING ASPECT RATIO | 5.2 |
WING LOADING | 40g/dm² | LENGTH | 900mm |
Materials
At this time all of our planes are being 3D printed in lightweight PLA, with the exception of landing gear, wing joiners, and other high stress components which we print in a tough PLA copolymer.
The lightweight PLA is not colored, printing with an off white matt finish. It will except spray paint well, and decals can be applied over the paint. this allow personally customizing the coulure of the plane.
What's Included
Kits include all 3D printed components and materials needed to assemble plane. No electronics are included.
Shipping & Returns
Due to the nature of RC airplane building and flying, we can not accept returns on our products. BUT IF ANY OF THE PART IS BROKEN LET US KNOW THROUGH EBAY (MAKE SURE YOU can SPECIFY THE EXACT PART BROKEN) AND WE SEND YOU A NEW ONE FOR THAT PARTICULAR PART.
NOTE:THIS WILL ONLY APPLY 15 DAYS AFTER THE ITEM IS RECEIVED.
Requirement
7 channel transmitter and receiver. |
SERVOS NEEDED - x6 |
MOTOR: KV-1200 to 2450(RECOMENDING: Sunnysky x2212 kv1250-2450) |
ESC:40A |
PROPELLER: 8X5 |
BATTERY |
PUSH RODS - D1,2mm (min length 600mm) 5units
-STEEL ROD - D3mm (Length 130mm) 2units
-CF TUBE - D10mm (Length 400mm) 1unit
-STOP COLLARS D3,1mm 2units
-STOP COLLARS D2,1mm 1unit
-BOLT - M3X15mm (with nuts and washers) 4units
-BOLT - M3X25mm (with nuts and washers) 2units
-SCREW - M2X8mm (aprox) 42units
-GLUE - cyanoacrylate
-PUSH RODS CONNECTORS 6units
-RUBBER BAND- L50mm (aprox.)
-STEEL ROD - D3mm (Length 130mm) 2units
-CF TUBE - D10mm (Length 400mm) 1unit
-STOP COLLARS D3,1mm 2units
-STOP COLLARS D2,1mm 1unit
-BOLT - M3X15mm (with nuts and washers) 4units
-BOLT - M3X25mm (with nuts and washers) 2units
-SCREW - M2X8mm (aprox) 42units
-GLUE - cyanoacrylate
-PUSH RODS CONNECTORS 6units
-RUBBER BAND- L50mm (aprox.)
