Product introduction:
► Product name: Upgrade the new electric heating handle
► Product net weight: 289g
► Product color: black
► Product material: imported nylon, soft TPU environmental protection material
► Handle length: left hand handle: 14cm right hand handle length: 14.7cm
► Handle diameter: 22mm 7/8 "
► Input voltage: 12V
► Product power: 25W [a pair of power]
► Handle temperature: 50℃-70℃ adjustable
► Switch type: three-stage adjustable switch
► Product accessories: a pair of left and right handles, a throttle clip
► Applicable models: Applicable motorcycle handlebar with a diameter of 22MM
► Product name: Upgrade the new electric heating handle
► Product net weight: 289g
► Product color: black
► Product material: imported nylon, soft TPU environmental protection material
► Handle length: left hand handle: 14cm right hand handle length: 14.7cm
► Handle diameter: 22mm 7/8 "
► Input voltage: 12V
► Product power: 25W [a pair of power]
► Handle temperature: 50℃-70℃ adjustable
► Switch type: three-stage adjustable switch
► Product accessories: a pair of left and right handles, a throttle clip
► Applicable models: Applicable motorcycle handlebar with a diameter of 22MM
Six design highlights:
[1] The wire does not rotate with the refueling, the service life is longer and more convenient;
[2] No sliding contact, spring power supply technology, the handle is more flexible when refueling;
【3】Integrated injection molding of the handle, waterproof and dustproof, longer service life and safer;
[4] One handle can be applied to 22mm and 25 direction models;
[5] Split single and dual 360 degree throttle design;
[6] The universal design of electric heating handles is applicable to a wider range of models.
[1] The wire does not rotate with the refueling, the service life is longer and more convenient;
[2] No sliding contact, spring power supply technology, the handle is more flexible when refueling;
【3】Integrated injection molding of the handle, waterproof and dustproof, longer service life and safer;
[4] One handle can be applied to 22mm and 25 direction models;
[5] Split single and dual 360 degree throttle design;
[6] The universal design of electric heating handles is applicable to a wider range of models.
[Product selling point]:
[1] Installation is super simple: After installing the throttle, align the lead elbow with the right hand to the throttle cable post and insert it. Gently tie the elbow and the cable post with a cable tie. Improve the problem of too many old accessories and too complicated installation.
[2] The first anti-off ring: The anti-off ring is used to prevent the handle from falling out, which is more flexible because it will not rotate eccentrically. Improve the old model with iron ring to fix the handle, the screw is loose and easy to come out, and the screw is tight, which will cause eccentricity and inflexible rotation.
[3] Fastening of the aluminum ring hoop: The left hand fixes the aluminum ring hoop more firmly. Exercise is safer. Improve the old model to use iron ring to fix and easy to swing.
[4] The wire does not turn with the refueling: spring power is used between the heating wire of the right hand and the power supply wire, and all the joints are soldered to ensure waterproof and anti-corrosion.
[5] Ultra-thin turntable: The left and right handles are thinner and more beautiful, and it is more convenient to press the horn.
[1] Installation is super simple: After installing the throttle, align the lead elbow with the right hand to the throttle cable post and insert it. Gently tie the elbow and the cable post with a cable tie. Improve the problem of too many old accessories and too complicated installation.
[2] The first anti-off ring: The anti-off ring is used to prevent the handle from falling out, which is more flexible because it will not rotate eccentrically. Improve the old model with iron ring to fix the handle, the screw is loose and easy to come out, and the screw is tight, which will cause eccentricity and inflexible rotation.
[3] Fastening of the aluminum ring hoop: The left hand fixes the aluminum ring hoop more firmly. Exercise is safer. Improve the old model to use iron ring to fix and easy to swing.
[4] The wire does not turn with the refueling: spring power is used between the heating wire of the right hand and the power supply wire, and all the joints are soldered to ensure waterproof and anti-corrosion.
[5] Ultra-thin turntable: The left and right handles are thinner and more beautiful, and it is more convenient to press the horn.
Delivery content:
A pair of heating handles
A pair of heating handles
【installation method】:
One: Install the fueler into the throttle seat
Put the fueler into the throttle seat, hang the throttle cable, then close the lid, and then insert the right handle into the fueler. Whether the rotation is flexible or not, it is not flexible to polish the fueler.
2: Insert the right handle into the oiler
Coarse positioning: align the anti-turning head of the right handle with the throttle cable post or other positions on the front of the car, insert the right handle so that the elbow rests on the cable post, and mark the insertion position.
Precise positioning: Try to change the tooth slot at the mark and insert it several times. Even if the elbow does not rotate, the angle of rotation is moderate and does not affect the maximum refueling. Step angle of cogging 15°
Three: The anti-falling ring is installed in the throttle seat
Insert the right handle into the fueler to the end, and the anti-drop ring must be installed in the throttle seat! The anti-dropping ring is to prevent the right handle from coming out of the refueling seat and causing a safety accident.
The car shell of individual scooter will be inserted between the right handlebar and the fueler. At this time, the anti-drop ring cannot be installed in the throttle seat. You must apply 502 glue at the connection between the fueler and the anti-drop ring to prevent the right handle from falling out. Immediately after the glue is applied, the right handle should be inverted to prevent it from flowing into the handle and affecting the rotation.
Four: Inclined installation to extend life
The left switch is installed obliquely so that rainwater can flow out, which can extend the life of the switch. If the switch is in poor contact, it can be repeatedly pressed by dripping gasoline. Use the blade to remove the button to scrape the contact rust and clean it with gasoline.
Five: DC power supply vehicle connection method
Features of DC models The headlights are powered by a battery. Shi Rong held the black wire as positive and connected it to the 12-volt positive wire locked out by the faucet. The cord must be able to turn off the power when the faucet lock is twisted. If the power cannot be turned off, the battery will be drained for storage when the handle switch is forgotten to turn off. Handle the green wire as negative and connect it to the negative pole of the vehicle ground.
Put the fueler into the throttle seat, hang the throttle cable, then close the lid, and then insert the right handle into the fueler. Whether the rotation is flexible or not, it is not flexible to polish the fueler.
2: Insert the right handle into the oiler
Coarse positioning: align the anti-turning head of the right handle with the throttle cable post or other positions on the front of the car, insert the right handle so that the elbow rests on the cable post, and mark the insertion position.
Precise positioning: Try to change the tooth slot at the mark and insert it several times. Even if the elbow does not rotate, the angle of rotation is moderate and does not affect the maximum refueling. Step angle of cogging 15°
Three: The anti-falling ring is installed in the throttle seat
Insert the right handle into the fueler to the end, and the anti-drop ring must be installed in the throttle seat! The anti-dropping ring is to prevent the right handle from coming out of the refueling seat and causing a safety accident.
The car shell of individual scooter will be inserted between the right handlebar and the fueler. At this time, the anti-drop ring cannot be installed in the throttle seat. You must apply 502 glue at the connection between the fueler and the anti-drop ring to prevent the right handle from falling out. Immediately after the glue is applied, the right handle should be inverted to prevent it from flowing into the handle and affecting the rotation.
Four: Inclined installation to extend life
The left switch is installed obliquely so that rainwater can flow out, which can extend the life of the switch. If the switch is in poor contact, it can be repeatedly pressed by dripping gasoline. Use the blade to remove the button to scrape the contact rust and clean it with gasoline.
Five: DC power supply vehicle connection method
Features of DC models The headlights are powered by a battery. Shi Rong held the black wire as positive and connected it to the 12-volt positive wire locked out by the faucet. The cord must be able to turn off the power when the faucet lock is twisted. If the power cannot be turned off, the battery will be drained for storage when the handle switch is forgotten to turn off. Handle the green wire as negative and connect it to the negative pole of the vehicle ground.
Notes:
1. Please check the size chart carefully before payment.
2. Due to manual measurement, please allow 0.5-1 inch difference. (1 inch = 2.54 cm)
3. Due to different computer monitors, the actual color may be slightly different from the list picture.
4. Does not include instructions.
1. Please check the size chart carefully before payment.
2. Due to manual measurement, please allow 0.5-1 inch difference. (1 inch = 2.54 cm)
3. Due to different computer monitors, the actual color may be slightly different from the list picture.
4. Does not include instructions.
If the product is not suitable or has quality problems, please contact our customer service directly to solve the problem. We will give you a satisfactory solution.