BUILD VIDEO ON YOUTUBE USE THE LINK BELOW:
https://youtu.be/VAdXKSNOzVE?si=nYgCp4RXjjUq0PEF
model R in Action:
https://youtu.be/GMoo28hzKx0?si=xuZLTMrQs20XMdYh

The Eclipson Model R is an airplane designed with one main objective: Achieve the highest speed possible using the standard Eclipson power pack. The thin laminar airfoil and narrow, streamlined fuselage are some of the key factors that explain why this plane reaches 100+ MPH (170KM/H) with the recommended standard power pack. The airframe is extremely strong, reinforced with carbon fiber tubes. You won't have to worry about pulling extreme G-maneuvers because  the model has a retractable landing gear this allow fast  flying.

PRINTED WEIGHT   

  

220g  

WING SPAN   

1030mm  
   

TAKE OFF WEIGHT   

640gr   

WING SURFACE   

15.2dm2  
   

STALL SPEED   

27kmh  

WING ASPECT RATIO   

 6.9  

WING LOADING   

42g/dm²  

LENGTH   

780mm 



Materials 

At this time all of our planes are being 3D printed in lightweight PLA, with the exception of landing gear, wing joiners, and other high stress components which we print in a tough PLA copolymer.

The lightweight PLA is not colored, printing with an off white matt finish. It will except spray paint well, and decals can be applied over the paint. this allow personally customizing the coulure of the plane.

What's Included 
Kits include all 3D printed components and materials needed to assemble plane. No electronics are included. Note that this is not the actual plane this is to give an idea of what it included.


Shipping & Returns

Due to the nature of RC airplane building and flying, we can not accept returns on our products. BUT IF ANY OF THE PART IS BROKEN LET US KNOW THROUGH EBAY (MAKE SURE YOU can SPECIFY THE EXACT PART BROKEN) AND WE SEND YOU A NEW ONE FOR THAT PARTICULAR PART. 

NOTE:THIS WILL ONLY APPLY 15 DAYS AFTER THE ITEM IS RECEIVED.

Requirement 

5 channel transmitter and receiver.  

SERVOS NEEDED - x4  

MOTOR: EDF  

KV- 1200 to 2400   

Proposed - Sunnysky x2212 kv1250  

ESC:40A  

BATTERY  

CAPACITY- 1500 mah  
VOLTAGE - 11,1 (3S) OR 14.8 (4s)  
WEIGHT (Approx.) - 120  

PROPELLER  
FOR 1200KV - 8X6  
FOR 1500KV - 7x6 or 8x5  
Proposed - 8X6(ccw) 


OTHER PARTS 
-PUSH RODS - D1,2mm (length 500mm)  5units 
-BOLT - M3X25mm (with nuts and washers)  3units 
-BOLT - M3X15mm (with nuts and washers)  4units 
-SCREW - M2X8mm 26units 
-VELCRO 
-GLUE - cyanoacrylate 
-CARBON FIBER TUBE - D6x4mm (length 490mm) 1units 
-CARBON FIBER TUBE - D8x6mm (length 490mm) 1units 
-CARBON FIBER TUBE - D4x3mm (length 220mm) 2units 
-CARBON FIBER ROD - D2mm (length 270mm) 1 unit 
-STEEL ROD - D2mm (Length 150mm) 2units         
-RUBBER BAND - 1units 
-STOP COLLARS D2,1mm  1units 
-PUSH RODS CONNECTORS  5units 


 

 

 


Captura.PNG