Specifications:
1.Plug Type: 9007, High-Low Beam
2.LED type: CSP LED chips
3.Power: 240W/set(120W/bulb)
4.Luminous Flux: 36000LM/set(18000LM/bulb)
5.Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
6.Color Temperature: 6000K White
7.Beam Angle: 360°
8.Operating Temperature: -40 - +80°C
9.Operating Life: >50000hrs
11.Number of Bulbs: 2
12.To Fit: High + Low Beam Head Lights
13.Placement on Vehicle: Left,Right,Front
14.Material: Aviation 6063 Aluminum Profile
15.Application: Headlight(High + Low Beam HeadLights )
1.Plug Type: 9007, High-Low Beam
2.LED type: CSP LED chips
3.Power: 240W/set(120W/bulb)
4.Luminous Flux: 36000LM/set(18000LM/bulb)
5.Voltage: DC 9-32V ( Fit 12V,24V Vehicle )
6.Color Temperature: 6000K White
7.Beam Angle: 360°
8.Operating Temperature: -40 - +80°C
9.Operating Life: >50000hrs
11.Number of Bulbs: 2
12.To Fit: High + Low Beam Head Lights
13.Placement on Vehicle: Left,Right,Front
14.Material: Aviation 6063 Aluminum Profile
15.Application: Headlight(High + Low Beam HeadLights )
Features:
1.100% New and Never Used
2. Super bright Bridgelux CSP chip(USA),360 degree clear beam no blind zone
3. IP Rate: IP67
4.Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
5. Built-in constant current CPU,instant full brightness without start-up relay
6.High quality Aluminum heat dissipation ensures the secure temperature range
9.Low Power Consumption than Halogen bulb, Energy Saving
10.Low Voltage Protection, High Precision Constant Current driver Chip
11.Shakeproof and Long lasting up to 10,0000+ Hours.
12. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
13. All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
14. Easy installation
1.100% New and Never Used
2. Super bright Bridgelux CSP chip(USA),360 degree clear beam no blind zone
3. IP Rate: IP67
4.Built-in Cooling Fans & Ballasts , Smart Efficient Cooling System Fast Heat Dissipation，No Other Fans & Ballasts Required
5. Built-in constant current CPU,instant full brightness without start-up relay
6.High quality Aluminum heat dissipation ensures the secure temperature range
9.Low Power Consumption than Halogen bulb, Energy Saving
10.Low Voltage Protection, High Precision Constant Current driver Chip
11.Shakeproof and Long lasting up to 10,0000+ Hours.
12. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
13. All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
14. Easy installation
Package Content:
2x 9007 LED Headlight Bulbs
Randomly send new and old boxes
2x 9007 LED Headlight Bulbs
Randomly send new and old boxes
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.