820W Automatic Oil Press Machine Peanut Cold Hot Seed Oil Extractor TEMP Control
- This is one multi-functional home oil press machine, you also can use it for small business.
- Intelligent control system, temperature adjustable, cold and hot squeezing.
- Automatic control, simple to operate, easy to install and disassemble.
- Unique pressing chamber, faster heat conduction, can fry while pressing.
- Food grade 304 stainless steel, safe and reliable.
- High power copper motor, 24 hours continious pressing, high efficiency, high oil extraction rate.
- Apply to press almost all kinds of seeds, such as peanuts, rapeseed, sunflower seeds, sesame seeds, walnuts, olive kernel, flax seed etc.
Specification:
Model:M37
Voltage:AC 110V/220V ; 60Hz 50Hz
Power:820W
Material:304 stainless steel
Pressing Speed (For reference):40%-46% (peanut)
Preheat time:8min
Press rod length:20cm
Squeeze method:Cold; Hot
Smart temperature control:Yes
Noise:≦70Db(A)
Dimension:360 * 310 * 155mm
Net Weight:Appr. 8kg
Gross Weight:Appr. 11kg
Raw material oil yield (for your reference)
Peanut:40%-46%
Sesame:40%-48%
Rapeseed:35%-40%
Flaxseed:32%-42%
Tea seed kernel:0%-38%
Hazelnut kernel:42%-46%
Sunflower seed:42%-47%
Walnut:50%-68%
Olive kernel:55%-60%
Soybean:5%-10%
Almond:43%-49%
Avocado kernel:18%-28%
Pumpkin seeds:33%-38%
Operation instructions:
1. Turn on the power switch and start heating automatically. The temperature can be adjusted. Generally, 200 ℃ is a general temperature. Different problems can be adjusted according to the specific situation of raw materials and wait for the completion of the heating countdown.
2. After preheating for at least 8 minutes, the motor switch can be turned on, and the motor starts to run.
3. After the motor is started, add the raw material for pressing. The machine adopts open hopper, and the feeding can be continued at any time during the pressing process.
4.In the process of pressing, the power switch should be kept in the heating state all the time. Do not turn off the power switch.
5. Press finish, turn off the motor switch, so that the machine stops running. Wait a few minutes, wait for the oil drop in the chamber, and then carry on the next step.
6. After the press is completed, in order to better clean and separate the press chamber and the press rod, the reverse function of the machine can be started, and the reverse program can be started by pressing the reverse switch.
7. Before the reversal, please ensure that the chamber out of the oil mouth of the oil has been dropped, generally reverse 3-5 seconds can be, not too much, too long time reversal.
8. Do not press irrelevant raw materials, such as hard foreign body to enter, will cause the card dead phenomenon, this time to close the motor switch, by reversals, pour the reversal of foreign body and remove by pressing the press bore rod separated clean foreign body, cleaned up before the foreign body must not start again press, so as not to damage the machine.
What in Package:
1 x Automatic Oil Press Machine
Notice: According to international shipping requirements, it is forbidden to have powder, liquid, nor battery in package,In order to avoid delay of transportation, we will have to check and take out these items before packing.