GBA IPS V2 LCD Kits with W/ 1800mAh batteries Type-C For Game Boy Advance Shell
Battery informations：
Real Capacity: 1800mah
Type-C port
TI Chip. No need cooling fin.
Over Voltage protection, Over Current protection, Short circuit protection.
It can be compatible with USB Type A charger and USB type-C charger.
Note：
● If the battery is bulging, please stop using immediately. Please prevent the battery from being squeezed or deformed.
● Please do not Pierce or scratch the battery with sharp objects. Otherwise the battery contents may burn or explode when exposed to air.
Note 1: This listing does not include the game console!
Note 2: Now we upgrated this item, it is IPS LCD V2 Version, it has solved the problem of the screen tearing and centered.
You need to cut the shell case to put in the IPS LCD. Pleasse contact me after you receive it. I will send the instruction manual to you.
Or,You can buy the pre-cut shell case from this listing if you don't want to cut the sell case by yourself. (Cut shell case really need long time. I cut the shell case by machine).
All items are carefully tested before send.
- Press and hold Select buttons, then press L buttons to increase the brightness.
- Press and hold Select buttons, then press R buttons to decrease the brightness.
- This iPS Backlight LCD have 178° press R buttons to decrease the brightness.
- The screen comes with brightness adjustment function, which supports 10 levels of brightness adjustment. (Need to weld 3 lines)
- The screen comes with a cable and supports both 32-pin and 40-pin motherboards. There is no need to purchase additional cables or worry about how many pins the motherboard has. Eat all.
- The colors are bright, the colors are transparent, the colors are too smooth and comfortable, and the contrast is perfect (personal subjective) waiting for your verification.
Description:
- This is a IPS backlight LCD, it can replace the old LCD to iPS Backlight LCD.
- A very good third-party made backlight LCD for GB A Console
- 4 pixels in 1 IPS full Viewing Angle LCD for Gmae Boy Advance.
- The four sides are all viewable, and the color is brighter and fuller than the AGS-101 screen.
- Supports 10 levels of brightness adjustment (requires additional welding of 3 wires)
- The pixels are four times larger than ags-101, the image is not pulled up, the same proportion as the GBA original screen.
- It's very easy to install, and if you don't need brightness adjustment, you don't even need to connect any wires. It supports 32pin and 40pin ports.
Packing including:
- 1x IPS LCD, 1XAdapter Cable, 1x Glass Screen lens, 1xDouble-sided tape, 1x sponge.
- 1x IPS LCD, 1x Pre-cut shell case,1xAdapter Cable, 1x Glass Screen lens, 1xDouble-sided tape, 1x sponge,1* TYPE-C Rechargeable battery
