Powder Coating Machine Industrial Powder Spray Gun Intelligent for Spraying Paint Metal 45L Electric Electrostatic Powder Coating Machine 50W Paint Automatic Plastic Spraying Machine Spray Gun Equipment Coating Machine
Description: An electrostatic powder coater is a dry process that uses grounded pigment and resin particles that have been electrostatically charged and sprayed onto electrically grounded parts. The charged powder particles adhere to the part and remain there until melted and fused into a smooth coating in a curing oven. Prior to coating, the parts to be coated are first pretreated similarly to conventional liquid coated parts. The pre-treatment process is usually performed in series with the coating and curing operation series.
How electrostatic sprayers work: Electrostatic powder coating equipment (electrostatic sprayer) will be coated to the surface work of the powder coating, in the electrostatic powder under the action of uniform adsorption on the surface of the workpiece, the formation of powder coating, powder coating baked at high temperatures, levelling and solidification into different results (the effect of different types of powder coating) coating.
This product is widely used in home appliances, hardware, security doors (windows), construction, auto parts, sports equipment, medical equipment, aluminium and other industries.
Operating Instructions: Connect all connecting wires and air hose. Switch on the power switch (lit indicator light is on). Press the gun switch to adjust the required voltage (individual setting, recommended voltage is 60KV-80KV). Put the powder into the powder feeder drum. Press the gun switch to adjust to high voltage. If powder is sprayed, start working.
Caution: The earth wire is connected to the equipment and must be connected to the spray booth, which should be connected to a special clean floor. Workpieces, hanging objects and stands must be connected to the earth wire to prevent discharge sounds from earth faults. All compressed air must be kept neat and dry and free from oil or water. It is recommended that the customer use a refrigerated and dry air source. If the customer is using an ordinary oil/water separator, the oil and water must be drained periodically to prevent the paint ratio from being affected by water build-up or excessive humidity in the air tanks of the powder drum, solenoid valves, and air hoses. If abnormal powder spraying occurs on new equipment (i.e., it gets bigger or smaller from time to time), it is usually because the powder feed and discharge air pressures have not been properly adjusted. When powder feed air pressure is increased, powder spray increases. Adjust powder mix air pressure to a higher level to ensure even powder spray. Powder pumps and guns should be purged and tidied with compressed air after a period of use. Pressure regulating valves have a locking mechanism where "push" means "closed" and "pull" means "open ". The buttons of the various regulating valves should be adjusted to the proper position (as indicated by satisfactory powder coating).
If air pressure is insufficient, check the following conditions: Whether the air pressure of the compressor exceeds 6kg. Whether there are leaks in the air pipe. Whether the pressure regulating valve is in good condition. Normally, pressure regulating valves are easy to adjust, anti-clockwise (closed) or clockwise (maximum). Do not adjust them violently. If the pressure cannot be adjusted to a higher level, the unit will not be used until the relevant solution is found and the fault is repaired.
Packing list: 1 x Manual powder with cable 1 x Powder spare parts 1 x Powder injector 1 x Fluidised powder hopper 1 x Trolley 1 x Oil-water separator 1 x Pressure regulating valve 1 x Powder hose, air hose, grounding wire
Note: Import duties and taxes are NOT included in the item price or shipping cost, buyer is responsible for it. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data.
On 17-Oct-2023 at 07:25:23 BST, seller added the following information: