BUILD VIDEO ON YOUTUBE USE THE LINK BELOW:
https://youtu.be/uyA3pB0FsL0?si=ynRthUuJng7Kychd


This is Eclipson's version of the classic Pitts S12. This semiscale model is extremely easy to fly and very agile, making this plane ideal for all skills levels interested in aerobatics. The tension wires (fishing line) used on the wings are not just decorative, they work in the same manner they do on the full scale model, providing rigidity to the wings preventing the need for carbon fiber rods. This model fits well in most cars without disassembling the wings which is a major advantage, although the wings and landing gear are detachable. Also, the new landing gear locking mechanism developed and patented by Eclipson deserves special attention. The system is fast, simple, and effective. 


PRINTED WEIGHT   

600g

WING SPAN

1,250mm


TAKE OFF WEIGHT 


1100g

WING SURFACE

48dm²

STALL SPEED  

22km/h

WING ASPECT RATIO   

NACA1410

WING LOADING   

23g/dm²

LENGTH

1000mm




Materials 

At this time all of our planes are being 3D printed in lightweight PLA, with the exception of landing gear, wing joiners, and other high stress components which we print in a tough PLA copolymer.

The lightweight PLA is not colored, printing with an off white matt finish. It will except spray paint well, and decals can be applied over the paint. this allow personally customizing the coulure of the plane.

What's Included 
Kits include all 3D printed components and materials needed to assemble plane. No electronics are included. Note that this is not the actual plane this is to give an idea of what it included.

Shipping & Returns

Due to the nature of RC airplane building and flying, we can not accept returns on our products. BUT IF ANY OF THE PART IS BROKEN LET US KNOW THROUGH EBAY (MAKE SURE YOU can SPECIFY THE EXACT PART BROKEN) AND WE SEND YOU A NEW ONE FOR THAT PARTICULAR PART. 

NOTE:THIS WILL ONLY APPLY 15 DAYS AFTER THE ITEM IS RECEIVED.

REQUIREMENT

5 channel transmitter and receiver.  

SERVOS NEEDED - x5

KV-  800 to 2400

MAX POWER -  300 to 1000 watts

DIAMETER - 35mm

VOLTAGE - Up to 14,8V (4S)

ESC:50A  

CAPACITY- 2000 mah

VOLTAGE - 14,8 (4S)

WEIGHT (Approx.) - 220 g

PROPELLER  
FOR  900KV - 11x7
FOR 1200KV - 11X5.5


OTHER PARTS

-PUSH RODS - D1,2mm (min length 750mm)  4units

-BOLT - M3X25mm (with nuts and washers)  3units

-BOLT - M3X15mm (with nuts and washers)  4units

-SCREW - M2X8mm 35units

-VELCRO

-GLUE - cyanoacrylate + accelerator

-CARBON FIBER TUBE - D4x3mm (length 360mm) 1units

-STEEL ROD - D2mm (Length 31mm) 2units 

-STEEL ROD - D3mm (Length 200mm) 2units

-MAGNETS - 10x5x3mm 4units

-STOP COLLARS D2,1mm  2units

-PUSH RODS CONNECTORS  6units

-FISHING LINE