Detail
IRF540 MOSFET Switch Module (1 Channel 1 Route MOSFET Button IRF540 + MOSFET Switch Module For Arduino B3 New)
MOSFET is an electronic device having a good switching characteristics, is widely used in the electronic switch circuit needs, such as switching power supplies and motor drives, and a lighting dimming. Relays are all very familiar with another module has switching characteristics, but because of the working principle of the relay is generally achieved by mechanical contact on and off purposes, which will inevitably lead to a very short switching times under the circumstances, the relay situation does not work, the other sounds when Baba contact switch in some cases is more annoying thing。
Use this module with Arduino electronic building blocks 4 IRF540 MOSFET switches use the same, but changes to the way the original four. Use reference Arduino 4-way switch IRF540 MOSFET Modules:
We designed this four-way MOSFET switch can provide up to four groups of electronic switches, were used to control different circuit modules. Affected MOSFET works, the electronic building blocks can be used to control the DC circuit, such as DC LED screen, etc., are not suitable for controlling the AC circuit. Under extreme circumstances of the MOSFET switch can be used to control 100V / 33A DC circuit, but control is recommended not less than the minimum DC voltage 9V。
The circuit is connected at one end of the wire is slightly controlled some trouble. To control a 12V LED lights, for example,
First, the positive (+) and negative (-) between the connected power;
Then connect the positive LED lights with the module connected to the positive (+),
LED lights with the anode connected to the switch 1 (S1) on;
If there are other LED lights with the need to control,
Just the same cathode lights with LED module is connected to the positive (+),
LED lights with the negative electrode in turn is connected to the switch 2 (S2), switch 3 (S3), the switch 4 (S4) on;
Connection control side is much simpler,
We only need a sensor cable,
The corresponding control port Arduino sensor expansion board connected, you can control the 12V LED lights brought by Arduino.
Experiment, we picked up two LED lights。
Test code as follows:
int s1Pin = 6;
int s2Pin = 7;
void setup() {
pinMode(s1Pin, OUTPUT);
pinMode(s2Pin, OUTPUT);
}
void loop() {
int i;
digitalWrite(s1Pin, HIGH);
digitalWrite(s2Pin, HIGH);
delay(500);
digitalWrite(s1Pin, LOW);
digitalWrite(s2Pin, LOW);
delay(500);
for (i = 0; i < 10; i ++) {
digitalWrite(s1Pin, HIGH);
delay(500);
digitalWrite(s1Pin, LOW);
delay(500);
}
for (i = 0; i < 100; i ++) {
digitalWrite(s2Pin, HIGH);
delay(50);
digitalWrite(s2Pin, LOW);
delay(50);
}
}
Package included:1 x 1 Channel 1 Route MOSFET Button IRF540 + MOSFET Switch Module Arduino
IRF540 V2.0+MOSFET Switch (4 Route Mosfet Switch Module Button Irf540 V2.0 Four Channel For Arduino DIY)
MOSFET is an electronic devices with good switching characteristics. It is widely used in circuits, such as power supplies switching ,motor drives, lighting dimmer and so on. Relay is another kind of module with switching characteristics. Since relay works relying on mechanical contacts to open or shut. In this way it s will inevitably lead to relay's stopping working while switching time is too short. And papa sound made by relay in some situations is annoying.
We designed a 4-channel MOSFET switch. It can supply up to four groups of electronic switches to control different circuit blocks respectively. Limited by the working priciples, MOSFET can only be used to control the DC circuit, such as DC-LED screen and so on, but not suitable for AC circuit control.
In some extreme cases,It can be used to control 100V/33A DC circuit. However, it is suggested that the controlled DC voltage is more than 9V.
Package Included:1PC*Four Channel 4 Route MOSFET Button IRF540 V2.0 MOSFET Switch Module For Arduino.
IRF520 MOSFET (IRF520 MOS FET Driver Treiber Modul 3.3V/ 5V für Arduino MCU ARM New)
Size: 33*24mm
Weight: 10g
Voltage: 3.3V, 5V
Ports: Digital Level
Output load voltage :0-24V
Output load current: <5A (1A above need to add heat sink)
Platform: Arduino, MCU, ARM, raspberry pie
Using original IRF520 Power MOS, you can adjust the output PWM
Arduino drive up to 24V allows the load, such as LED lights, DC motors, miniature pumps, solenoid valves
PWM dimming LED can be used to achieve stepless dimming, variable speed motor
Package Included:
1PC*TOP MOSFET Button IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
MOSFET Current Switch (MOSFET MOS 30V or 6.5A Power Controller Large Current Isolated Switch Module)
MOSFETs are awesome. They’re like a switch that you flip electronically!
This MOSFET Power Controller makes it easy to switch a battery supply on
and off using your favorite microcontroller. The board also has sewable pads
so you can use it in e-textile projects that need more juice.
The MOSFET Power Controller came about because microcontrollers,
like the Arduino or LilyPad Arduino, can only supply a limited amount of current.
Sometimes, though, you want to control something that takes a lot of
current like a fan or a heater (or a really bright LED). Simply connect a
battery to the JST connector on the MOSFET Power Controller, connect
the thing that needs power to the output, then connect one of the digital
outputs of your microcontroller to the input pads. Now whenever you drive
that pin on your controller HIGH, the battery will be connected!
The N-Channel MOSFET used in this design is rated for up to 30V and 6.5A
although the board is really intended to be used at lower power. If you hook up
anything beyond a 3.7V Li-Po battery, proceed at your own risk!
Features:
Control High-Current Loads
JST Connector makes Changing Batteries a Snap
It’s Sewable! (Also has standard 0.1" spaced headers)
Package Included:1PC*MOSFET MOS 30V or 6.5A Power Controller Large Current Isolated Switch Module
IRF540 DIP {New IRF540N IRF540 TO-220 Power MOSFET IRF 100V 33A}
Packing List:
5PCS/10PCS/50PCS New IRF540N IRF540 TO-220 Power MOSFET IRF 100V 33A
IRF540S { IRF Mosfet IRF540 IRF540NS TO-263 Power New IC}
Packing List:
5PCS/10PCS/50PCS IRF Mosfet IRF540 IRF540NS TO-263 Power New IC
IRF520 DIP{100V 9.7A N-Channel Power Pulled IR MOSFET Transistor IRF520}
Easy to mount, Space saving.
Product Name : MOSFET
Model No. : IRF520
Type : N-Channel
Voltage(vdss) : 100V
Current(id) : 9.7A
Max.Vgs(th) : 4V 250μA
Power : 48W
Package Type : TO-220-3
Mounting Hole Diameter : 3.6mm/0.14"
Pin Size : 14 x 1.8mm/0.55" x 0.07"(L*Pitch)
Total Size : 29 x 10 x 4mm/1.1" x 0.39" x 0.16"(L*W*T)
Color : Black
Weight : 3g
Package : 1 x MOSFET
Packing List:
5PCS/10PCS 100V 9.7A N-Channel Power Pulled IR MOSFET Transistor IRF520
IRF3205 DIP{55V 110A IRF3205 TO-220 IRF 3205 Power MOSFET}
Package Included:
2PCS/10PCS/20PCS 55V 110A IRF3205 TO-220 IRF 3205 Power MOSFET
Package Included:
2PCS/5PCS/10PCS IRF3205S IRF3205 MOSFET N-CH 55V 110A D2PAK TO263
We prefer PayPal .For purchasing multiple items , please contact us for a combined invoice .
generally we would like to receive payment thin 48 hours if .
2 business days after we received the payment . when you buy multiple items ,your shipping
cost will be combined with discount .
SHIPPING TIME (weekends/holidays excluded) |
|||||
Country Name |
Shipping Time |
Country Name |
Shipping Time |
||
USA/Canada |
10 -15d |
Spanish/Portugue |
10-25d |
||
East/South Asia |
10 -15d |
France/West Asia |
10-25d |
||
United Kingdom |
10 -20d |
Italy |
10-30d |
||
Australia/New Zealand |
10 -15d |
West Asia/Middle East |
15-25d |
||
Most Country of West/North Europe |
10-20d |
South America and Africa |
15-30d |
||
East /Middle Europe/Russia |
10-25d |
We specialize in electronic components . ICs, Capacitors, Diodes, Resistors, LEDs,
Transistors, and so on. Especially in Hard To Find Parts . we only sell
NEW , ORIGINAL parts . please buy with confidence .We offer NO-QUESTION-REFUND