Welcome to the Patkor store auction
In this auction we offer:
1 Pcs, Brand New
SRM-544 Terra pass-through multiswitch with active FM/DAB/DVB-T path and /T2UK
Parameters:
The SRM-544 R80544 programmable multiswitch is equipped with 2 pairs of dSCR/Legacy + Terr outputs. TV Out. The single-cable dSCR/Unicable mode enables independent division of the RTV/SAT signal using ordinary satellite splitters operating in the 5-2400 MHz band in accordance with the Unicable II standard to a maximum of 32 satellite receivers for each pair. By default, each multiswitch output from a given pair has been programmed in a configuration that allows the RTV/SAT signal to be divided into 16 receivers. Each of the multiswitch outputs can be reprogrammed using the PC102W R80561 programmer. The Legacy mode output (ordinary output, as in a Universal converter or classic multiswitches) allows you to connect a classic satellite tuner. Distinguishing features: Built-in LNB switch enabling the replacement of the wideband/quatro converter, Number of tap outputs - dSCR/Legacy mode: 4 (2 pairs), DISEqC control connector enabling connection of the PC102W R80561 programmer and simultaneous configuration of all multiswitch outputs, Built-in AGC system - appropriately corrects the gain signal to ensure a constant, set level at the multiswitch outputs, automatic equalization of the signal level to 84 dBμV in the SAT path and 82 dBμV in the RTV path, Power supply diagnostics carried out using diodes located on the device housing, Fully compliant with the EN50494 - Unicable I standard , 8 User Bands (8 channels for each of 2 pairs), Fully compliant with the EN50607 - Unicable II standard, 32 User Bands (32 channels for each of 2 pairs), It is possible to mix receivers supporting the EN50607 and EN50494 standards in the same network, on each output (8 x EN50494 + 24 x EN50607), SRM-544 R80544 pass-through multiswitch is a device that enables the distribution of the DVB-S/S2 signal from one satellite position (two satellite positions after using wideband converters), terrestrial television DVB-T and analog/DAB radio based on digital channel stacking technique. The SRM-544 R80544 pass-through multiswitch has full support for receivers operating in two dynamic modes: SCR (Unicable I - 8 User Bands) and dSCR (Unicable II - 32 User Bands). It is equipped with 5 inputs (four pairs of polarization/band (VL–HL–VH–HH) plus an active TV path) and 2 pairs of outputs: dSCR Out (enabling independent division of the RTV/SAT signal to a maximum of 16 receivers using satellite splitters working in the 5-2400 MHz band for each of the 4 outputs in accordance with the EN50607 standard)/Legacy Out (ordinary output, as in a Universal converter or in classic multiswitches used to connect a classic satellite tuner). The built-in AGC (Automatic Gain Control) system appropriately corrects the gain at the multiswitch output to ensure a constant, set signal level. By default, all outputs of the SRM-544 R80544 multiswitch are configured in Legacy mode and switch to Unicable as soon as they receive a DiSEqC command compliant with the EN50494/EN50607 standard (dynamic mode). This means that on each of the two multiswitch outputs for each of the 2 pairs, the signal can be independently divided to a maximum of 16 receivers using satellite splitters operating in the 5-2400 MHz band in accordance with the EN50607 standard. The device can operate in two modes: dynamic mode (DYNAMIC) - output frequencies are fixed and each is assigned to the receiver (User Bands), a maximum of signal division using satellite splitters to 32 tuners (for each of four pairs). Receivers must comply with EN50494/EN50607 (UNICABLE I/UNICABLE II). static mode (STATIC) - both input and output frequencies are fixed, works as an IF/IF converter enabling the distribution of signals from 32 satellite transponders to an unlimited number of receivers. The dSCR series multiswitches are programmed using the PC102W R80561 programmer. The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device. The multiswitch requires an external power supply, e.g. PS202F 20V 2A R71468.
(Price for 1 Pcs)
Important information!
Please read the following information to avoid misunderstandings during purchase and shipping.
Shipping:
Due to eBay selling limits, we do not display the full stock quantity.
If you wish to buy more items than are available in our listings,
please contact us via eBay message;
Please specify the quantity you would like to purchase,
shipping location:
country, city, postal code.
Shipping type, economy, standard, express.
We will prepare an offer for you with one shipping cost.
If you bought multiple items from our listing,
eBay charges multiple shipping fees: don't worry about it.
If possible, our shipping department will refund you the overpaid shipping costs through eBay .
We only charge the actual shipping cost.
Shipping cost depends on the dimensions and weight of the package .
We ship from Poland – the European Union .
We ship worldwide.
If your country is not on the shipping list – please send us a message via eBay, and we will provide you with a shipping quote.
Regarding international transactions, the delivery time depends on weather conditions, pandemics, customs policy, national holidays, etc.
Should you have any other questions – please feel free to contact us.
Invoice
We issue 0% VAT invoices .
(Information for businesses registered within the European Union and having an EU VAT number, we issue an invoice with 0% VAT, the auction price does not include VAT)
Returns
We accept returns in accordance with eBay’s terms and conditions.
If you are not satisfied with the product – please contact us.
WELCOME TO OUR OTHER AUCTIONS