Automotive EVAP Smoke Machine Leak Detector Diagnostic Vacuum Leakage Tester Kit
Description:
MR CARTOOL T130 Car Smoke Leak Detector is a professional detector equipped with comprehensive funtions, which is easy to use and works flawlessly.  
An excellent tool to find and fix automotive intake, exhaust and emission leaks, etc. 
It will help user to position leakage on any pipe system quickly and exactly, such as EVAP system, crankshaft system, fuel tank system and so on.  
It helps technician and car user to solve problem quickly at one time,Smoke Output it will take 6 L/min and Output Pressure is 15~17 Psi, greatly eliminating repeated repairing work, significantly reducing diagnostic time and improving customer service.
 
Features:
1. Fast Smoke Output: Equipped with a built-in air pump and smoke generator. The smoke can be generated within 10 seconds after switch-on with stable and large amount of output. 
 
2. Air & Smoke Modes: Air mode: The air pump can be regulated separately. Smoke mode: The smoke generator can be regulated separately
 
3. Three Kinds of Display Meter: With visuable oil meter and pressure gauge, the test oil and pressure can be obviously observed. The flow meter has a regulator for adjusting the amount as needed. 
 
4. Various Pipeline Testings: The MRCARTOOL T130 smoke leak detector can deteck leaks in various pipeline, including EVAP system, Gearbox, Intake & Exhaust system, Cooling system and Engine air tightness. (Various fittings are equipped.)
 
5.2 years warranty. We provide 2 years warranty and 24 hours support email consultation.
Parameter:
Warranty: 2 Year
Brand: MRCARTOOL
Output pressure:15~17Psi 
Output flow: 6L/Min
Power supply: DC 12V Battery
Air source: built-in
Test oil capacity:10ML
Dimensions of the Main Unit:280*190*160mm
Package weight:3.9 KG
Package Size:295*295*210mm 
 
 
Easy to do leakage test:
1. Unscrew the oil filler cap and fill it with10ml baby oil into the detector for the first time.
2. Connect the car battery, then turn on the air pump and smoke generator.  
3. Connect the smoke hose to the pipeline to be tested through the adapter.  
4. In about 10 seconds, the leaks can be found according to where the smoke appears.
Note:
1. When you use this MR CARTOOL T130 Car Smoke Leak Detector for the first time, fill it with 10ml baby oil. Please be careful NOT to beyond this range.
2. The testing liquid: both liquid paraffin and baby oil are OK.
3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 80 ℃, it will automatically turn off the power. In this case, please operate it later.
8. The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
Packing Includes:
1pc* MRCARTOOL automotive smoke leak detector T130 main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc set* Soft rubber hose plug
1pc set* Hard rubber hose plug
1pc* Test oil bottle
1pc* Valve corde wrench
1pc* EVAP specilal connector & rubber connector part
1pc* Standard cone adapter
1pc* Universal airbag adapter
1pc* User manual
1pc* For BMW Professional Tool
 
 
PushAuction