Features 12V-16.8V input, wide power supply adaptability, optional car emergency starter power, car battery, model high rate battery pack, etc. (must be good performance, at least the level of the car can be started)
Built-in imported MOS tube, built-in imported low resistance high-power MOS tube can withstand 500A current, low heat (conventional spot welding current of about 80-150A)
Beyond the 99-speed stepless adjustment, applicable to the commonly used 0.1mm nickel-plated sheet, if 0.2mm stacked welding can be
Power adjustment knob, simplify, counterclockwise power is small, clockwise power is large, stepless adjustment
Trigger button, every time you press the pin output a high-energy pulse, welding efficiency at will, and with the output pulse indicator (different batches of light color yellow / green random delivery)
This product is very suitable for electronic enthusiasts to assemble or DIY lithium battery pack to use, to simplify the design concept, leaving behind the meaningless fancy features, everything to facilitate the practical center.
Specification
Main body size: 25mm * 170mm
Cable length: 350mm
Wire specification: 12AWG silicone wire
Power supply interface: copper ear / EC5 (package optional)
Use voltage:12V-16.8V
Spot welding current: 80A-15OA
Power components: imported 550A MOS tube
Shell material: high temperature resistant nylon
Spot welding material: 0.1mm nickel-plated tape
Solder needle specifications: 3MM * 1.5MM * 40MM professional aluminum oxide copper solder needle
Other remarks: copper needle for standard parts, can be replaced
matching nickel sheet for 6mm wide thickness 0.1mm nickel-plated steel tape, each roll of about 6 meters in length.
According to the package optional copper ear interface for battery or high rate model lithium battery pack, EC5 interface for car emergency start power
Note
This product does not contain batteries, customers need to support their own 12V-16.8V voltage within the good performance of lead-acid batteries or high rate power lithium battery pack, or car emergency starter power. (The performance of the battery needs to have the ability to start the car, because the instantaneous current of spot welding up to 150A), the above batteries can not be replaced by transformers or power adapters.
It is recommended to weld 0.1mm within the nickel-plated steel strip, by stacking 2 times welding can also get 0.2mm effect. Can not weld pure nickel or copper aluminum, etc.
Instructions for use
Do not reverse the electrode at the input, do not use beyond the specified voltage range
2. It is recommended to use 12V 20AH-60AH lead-acid battery with good performance, or high rate 3 or 4 series power lithium battery pack, or car emergency starter power as the power input. (Must have good performance, at least the level of the car can start, voltage range 12V-16.8V)
List
2 x soldering pen
1 x nickel sheet(nickel sheet about 6Meter)