Top plastic electrical box is cracked just the outside of the box.

All electrical equipment is in mint condition.

A complete replacement Wellis ACM0079 Spa Pump. 

The Wellis ACM0079 pump is simply a rebranded Chinese LP200 LX pump and so this is the pump that you will receive.

It has a 2hp single speed 48 frame sized motor designed specifically for use with Hot Tubs & Spas. Our stock of the LP200 LX pump have the latest upgraded ceramic/viton shaft seal kits within the wet end as previous models suffered with premature seal failure. 

Wellis ACM0079 Spa Pump OverviewThis is a 1 speed pump so the single high speed is used for JETS or Boost operation when bathing in your Spa or Hot Tub.

Pump wet end connects to 2 inch plumbing unions on the inlet and outlet. Both connections have a 78mm outside thread diameter and you can use 2 inch flat gaskets to seal the connections.Pump wet end can be rotated from the standard 12 O'clock position to 3 O'clock or 9 O'clock position easily by removing the four bolts that attach the wet end to the motor.Wiring - This replacement for the Wellis ACM0079 Spa pump is supplied with a new cable but you may need to swap the cable over from your old existing Wellis pump as control box connection type does vary between spa models. You will have three wires, live for the high speed (Red, Brown or Black). Neutral (Blue or White) and Earth (Green). If you need a new cable for your new spa pump then see related products.