Product Name : C Type V-belt
Pitch width: 19 mm
Width: 22 mm
Thickness: 14 mm
Material: rubber
Range of application Suitable for various transmission components
How to choose and buy triangle belt:
1、First determine the width and thickness of the belt.
2、Then determine the inner circumference.
Method:Use a thin rope around the path of the belt (i.e., the belt disk grooves) a circle to measure the length, resulting in data for the inner circumference of the belt. (i.e., the groove of the belt disk) and measure the length, and then get the data for the inner circumference of the belt.
This data + the thickness of the belt is the required belt length.
Because of measurement error, specific or according to the physical match shall prevail.
● Features :
01, simple structure, manufacturing, installation precision is not high, easy to use and maintain, applicable to the occasion of the center distance between the two axes is large.
02, smooth transmission, low noise, buffer vibration-absorbing effect.
03. When overloaded, the transmission belt will slip on the pulley. It can prevent the damage of weak parts and It can prevent the weak parts from being damaged and play the role of safety protection.
Widely used in automotive, industrial, household appliances, agricultural equipment, etc.
Installation instructions
When installing the belt, one side of the grooved wheel should be loosened first, adjusted to the position where the belt can be easily loaded, and then tighten the belt after it is easily loaded (the first time you install the belt, you should try to make the belt as tight as possible, and it needs to be tightened once after it has been running for 24 hours after starting the machine, and then there is no need to adjust it again) Do not use tools to forcefully pry the belt in or use the pulley to forcefully coil the belt. Do not use tools to forcibly pry into the belt or use the pulley to forcibly disc into the belt, forcibly installing the belt will damage the belt.
Forcibly installing the belt will damage the belt's strong layer and prevent the belt from functioning properly. Tension the belt while calibrating the shaft and pulleys. Tension the belt while calibrating the shaft and pulleys for parallelism.
The size is measured by hand, please allow for minor measurement errors. Due to the color display effect of different monitors, the photo color may be slightly different from the real thing.
● Warm Tips:
Package Include: According to your choice.