White ABS Plastic Sheet Board Plate DIY Model Craft Thick 0.5mm/0.8mm/1mm-5mm

Product Information
👉Product name: ABS sheet
👉 Product Color: White
👉 Material:Acrylonitrile-butadiene-styrene copolymer
👉 Thickness(mm)：0.5mm 0.8mm 1mm 1.5mm 2mm 3mm 4mm 5mm
👉 Width*Length(mm):200mm*200mm 200mm*300mm 300mm*500mm 100mm*200mm 200mm*250mm
👉 Quantity(pcs):1PCS 2PCS 3PCS 4PCS 5PCS 6PCS 9PCS 10PCS 15PCS 20PCS 25PCS 30PCS 50PCS
👉 Product Use: sand table architectural model, hand puppet production, DIY production, garden decoration, car model, home furnishing silly, etc.
👉 Product Features: good impact, good electrical insulation properties, heat resistance, good low temperature resistance, good chemical corrosion resistance, can be plated, coloring paint, welding, good dimensional stability
👉 Advantages:
1、Surface flatness and sharp corners.
2、Complete specifications for any cutting
3, excellent materials; new material factory
4, better toughness can be bent: 2MM can be accepted below different degrees of bending
👉 Product Details
1、Multiple thickness
Meet a variety of DIY needs to facilitate the creation
2、Easy to cut
Ordinary knives can be easily cut
3、Easy to bond
Can be glued with ABS modeling glue
4、Heating and bending
Heat the metal bar and bend it close to the ABS plate to cool it down.
👉 Wide range of applications
① Properties: ABS sheet has good impact strength, good dimensional stability, good dyeing, molding and processing and good mechanical teaching, high mechanical strength, high stiffness, low water absorption, good corrosion resistance, simple links, harmless and tasteless, with excellent chemical properties and electrical insulation properties. It is heat-resistant without deformation, and also has high impact under low temperature conditions. There is also a hard, not easy to scratch, not easy to deform the material.
② Applications:ABS is commonly used in video industry parts, architectural models, hand puppet making, phase-forming electronic industry parts, refrigerator refrigeration industry, electronic and electrical fields, pharmaceutical industry, automobile parts (dashboards, tool hatches, wheel covers, reflector boxes, etc.) radio shells, high-strength tools (vacuum cleaners, hair dryers, blenders, lawnmowers, etc.) typewriter keyboards, and so on.
👉 Product use and cutting method
①Mark the required size on the sheet with a ruler.
②Use a craftsman's knife to scrape a straight line notch on the plate along with the ruler, and try to scratch several times for more than 2mm, some depth.
③ remove the ruler, the notch ABS board, the straight line notch upward
④ Hold one side, the other side of the hand down a press, the ABS board immediately breaks off flush
👉 ABS board bending / right angle skills
1. Heat to make a right angle (the thickness of 1MMABS board used in the demonstration)
①Measure the required size with a ruler and cut it with a utility knife.
② with a metal sanding rod, with a lighter ignition moving back and forth, heating evenly (the temperature should not be too high, not close to the plate, please operate with caution)
③Bend the plate, do not once in place, so as not to break the plate deformation
④ metal temperature is weakened, then reheat and continue to bend can be
⑤Finally cool down and set the shape.
2. Bending by heating
① Fix the cut sheet on the round object, in order to ensure the effect, you can use a few more lines of adhesive tape fixed
② put into 90 ° C boiling water, two or three minutes after the removal (water temperature is too high, shorten the soaking time)
③Finally, cool down and finalize the shape