Animal Feed Pellet Mill Machine 8mm&4mm Plate Feed Granulator 3 Rollers 220V 200KG/h | |||||
Feed granulator is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants. This machine can be used alone, and customers who need it can also match it with a straw cutter for better results. |
|||||
|
|||||
Note: 1. Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane. 2. Please fill the oil tank before using the machine. Do not idle the machine for more than 2 minutes. 3.Double-check the belt and the screws before operation. 4.Clean up the rest after use to prevent damage to the machine. 5.If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening) |
|||||
Feature: | |||||
|
This machine is equipped with an enlarged and widened discharge port to prevent feed splashing and facilitate the collection of feed by customers. | ||||
This machine is equipped with a voltage display, which can visually see whether the voltage is stable. |
![]()
|
||||
![]()
|
|||||
|
After using the machine for a period of time, the customer needs to add butter to lubricate the grinding chamber here (approximately 4-6 months of use) (the butter gun and butter need to be purchased by the customer themselves, and we do not provide them). | ||||
Precautions: | |||||
1.When using, it
should be noted that there should be no foreign matter such as stones
and ironblocks in the raw materials. After the pellet machine has been
working continuously for morethan ten shifts, the pressure roller oil
hole, the universal joint oil hole, and the linkage shaft oilhole need
to be filled with high-temperature lubricating grease to make the
pressure roller Goodworking performance and extended bearing life.
4.Always check
the tightness of the screws in each part of the machine. If there is oil
leakage inthe gearbox, replace the oil seals in time, and check whether
the bearings in the machine headare short of oil.
9.Iron or stones cannot be put into the griller. |
|||||
|
|||||
|
|||||
Item Number: 1*Chicken Feed Pellet Mill Machine 220V (239174) |
Shipping & Handling Details |
Default Shipping Cost or Free Shipping Information: HandlingTime: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax/Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. |
Return / Refund |
If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges
▲ All returns
must be made within 30 days of delivery date. Items must be in new,
unused condition, with all original materials included with the
shipment. A partial refund may be applied for opened or damaged items,
depending on the condition.
Defective & Damaged Products |
Warranty & Feedback |
▲ 6
months' warranty for the machines, not for the consumables. We stand
behind our products all the item, so even if your warranty period has
expired, you can still seek for service or technical support from us
with low cost. |