Ball Diameter: 4.7 in - Sphere - 30 ft. of Wick Included as a Gift - Plastic Candle molds for Making Candles

This ball shaped mold comes from a wide variety of molds for the manufacturing of candles. With their help, you can easily create both traditional and original products with unique design.This mold and other ones that we offer are molds for candles of caprolon engineering. They are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in with paraffin additives and acidic environments without any harm. Due to the durability of caprolon, the candle molds can be used unlimited number of times.Important to know:1. Why is the surface porous? The pores on the surface of a candle may be formed from the low pouring temperature (below 140 °F degrees), poor wax quality.2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the pouring temperatures recommended for the candle base used, as this may cause leakage of the candle mass and difficulty when pulling the candle out of the mold. Make sure you also do not exceed the maximum temperature allowed for molds (176 °F), since they may be deformed.3. Why is the well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle.4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated prior to pouring, and the temperature should not exceed the maximum allowed for the candle base you are using.