Set of 2 brand new 15mm Spacers + 2 20mm Spacers. Includes Extended Bolts for Mercedes.
Please note, this kit is based off 27mm standard bolts. If you are putting this onto a Mercedes using the other common M14 x 1.5 R14, 45mm Thread Bolts (found on some G class with certain wheels etc) you will require longer bolts. Please check before purchase or get into touch.
2 x 15mm Hubcentric Spacers in Black (5x112, 66.6)
2 x 20mm Hubcentric Spacers in Black (5x112, 66.6)
20 Extended Black Radius 14 Bolts (10x M14 x 1.5x45mm R14) (10x M14 x 1.5x50mm R14)
FREE NEXT WORKING DAY DELIVERY INCLUDED!
These spacers couldn't be easier to fit, simply place the spacer over the hub of your car, put the wheel onto the spacer as normal, then use the extended bolts to push through the wheel, spacer, and into the hub to secure the wheel. Always torque the bolts up correctly as per your cars manual, then check the torque accordingly.
If there is any doubt or you have any questions at all, please give us a call and a member of our highly experienced team will be able to direct you straight to what you need.
Specifications
| Spacer Thickness | 15mm + 20mm |
| PCD | 5 x 112 |
| Centre Bore | 66.6 |
Bolt Thread | M14 x 1.5 |
| Bolt Length | 45 + 50mm |
| Package Includes | 4 x Spacers |
| Spacer Colour | Black |
Bolt Finish | Black Zinc Plated |
We offer a refund on any product that you are unhappy with. If you return it to us in its original state, you will receive a full refund.
All our spacer bolts are supplied by Ellis Engineering who are one of the largest manufacturer and distributor of automotive wheel fixings in Europe. When replacing any aspect of your cars wheels it is absolutely vital that the product you are using is safe and of the best quality available. Please be aware of the cheaper, less quality Chinese imported products on eBay.
From raw material produced in Italy; Ellis uses cold forged steel that is tempered in quality class 10.9 and all their products are TUV approved. The products are top quality zinc plated with 12 micron thickness and zinc nickel or laminar coatings guarantee corrosion resistance up to 700 hours in salt spray tests.
TRS is a company that supplies high quality wheel fixings and accessories. Our inventory includes nuts, bolts, studs, spacers, spigot rings, tools and just about everything you need to either replace worn out/rusty parts, or to customise your car with new ones. We provide parts from only the most trusted and well-established manufacturers and ship to countries all over the world.
We know that the measurements and specifications of what we sell can sometimes be a bit of a minefield. This is why we also have a team with an in-depth knowledge of the products and the market so even if you don’t know what you need, we do and we’re only a phone call away.
We like to specialise in the obscure and uncommon. That means that we often are able to easily supply parts to people who have been searching everywhere and had no luck. We can supply wheel fixings for everything from a 1964 Hilman IMP to a 2016 Porsche Carrera.
If you have any questions about us or need any help whatsoever finding the parts you need, give us a call on 01908 968074. If it’s outside of office hours then just leave a message and we’ll get back to you.
