This listing is for a set of 10 brand new wheel bolts.
These bolts are top quality high tensile carbon steel that are zinc plated and will not rust.
These are a great way to replace old rusty bolts, or to get extended bolts if fitting spacers to your wheels. If you are fitting spacers and are unsure what thread length you need, please give us a call and we can help.
These bolts are tapered seated and suitable for tapered wheels. It is vital that you get the correct seating for your car, for example all Mercedes/Audi/VW/Skoda have radius seated as standard, but most other car brands and after-market wheels have tapered
Please check the compatibility list above to see whether these bolts fit your car. The compatibility list will in most cases only tell you if the thread is correct for your car, the length and seating depends on the wheels that are fitted. If it's just a straight swap to replace the rusty ones you have, the best thing to do it to remove one bolt, measure with a ruler and compare to the photo below with the specifications on.
If you are unsure what you need or can't find what you need, give us a call on .
Bolt Specifications
Thread size: M14 x 1.5
Thread length: 60mm
Overall bolt width: 23mm
Overall bolt length: 85mm (inc the head)
Seat type: Tapered (Cone shaped)
Bolt material: Heat treated carbon alloy steel
Bolt finish: Bright zinc plated
Spanner size: 17mm Hex
FAQ's
Below are some of the common questions we get with some answers
What is Hex?
The Hex refers to the size of the nut/bolt head and therefore the corresponding size of the socket used with the wheel brace.
What is the seat?
The seat is the part of the nut/bolt that comes into contact with the wheel in the bolt holes.
There are 3 main styles of seat
Tapered - usually 60 degrees, this looks like a cone
Radius - this looks like a bowl
Flat - this is usually a flat washer.
What is M14 x 1.5?
This is the size of the thread.
The M number is the diameter of the thread and the 1.5 is the size of the pitch between each individual threads.
So an M14 x 1.5 is a 14mm diameter by 1.5mm thread.
There are 4 common sizes
M12 x1.25
M12 x 1.5
M14 x 1.25
M14 x 1.5
How do I know what nuts or bolts I need?
We have tried to make it as easy as possible for you to identify the correct nuts/bolts for your car.
If the title of this listing is stated for your car then this will be the standard fitment you require.
If you are still not sure please feel free to call us on and a member of our team will be happy to help.
TRS is a company that supplies high quality wheel fixings and accessories. Our inventory includes nuts, bolts, studs, spacers, spigot rings, tools and just about everything you need to either replace worn out/rusty parts, or to customise your car with new ones. We provide parts from only the most trusted and well-established manufacturers and ship to countries all over the world.
We know that the measurements and specifications of what we sell can sometimes be a bit of a minefield. This is why we also have a team with an in-depth knowledge of the products and the market so even if you don’t know what you need, we do and we’re only a phone call away.
We like to specialise in the obscure and uncommon. That means that we often are able to easily supply parts to people who have been searching everywhere and had no luck. We can supply wheel fixings for everything from a 1964 Hilman IMP to a 2016 Porsche Carrera.
If you have any questions about us or need any help whatsoever finding the parts you need, give us a call on 01908 968074. If it’s outside of office hours then just leave a message and we’ll get back to you.