1 brand new replacement wheel stud.
These are knock in studs to replace broken or damaged ones, or to increase the length for new alloy wheels/spacers.
Whether these studs are compatible for your vehicle depends on the spline thickness and the thread length.
Spline Thickness - This is the part of the stud which grips into the hub. It is vital this is absolutely correct. These studs are 14.8mm spline..
Thread Length - This is the length of the threaded section of the stud. It is important this length is correct so the wheel can be safely secured. The thread length of these studs are 54mm.
If it's just a straight swap to replace the broken/rusty ones you have, the best thing to do it to remove one stud, measure with a ruler and compare to the photo below with the specifications on.
If there is any doubt or you have any questions at all, please give us a call on 01908 316455 and a member of our highly experienced team will be able to direct you straight to what you need.
Stud Specifications
Thread | M12 x 1.5 |
Spline Thickness | 14.8mm |
Thread Length | 54mm |
Overall Stud Height | 70mm |
Stud material | Heat treated carbon alloy steel, quality class 10.9 |
Stud finish | Bright zinc plated |
We sell many different products and we know eBay shops can be very difficult to navigate, if you can't find what you need in our shop, give us a call on 01908 316455 and we can direct you straight to what you need.
We offer a refund on any product that you are unhappy with. If you return it to us in its original state, you will receive a full refund.
From raw material produced in Italy; RYBO uses cold forged steel that is tempered in quality class 10.9 and all their products are TUV approved. The products are top quality zinc plated with 12 micron thickness and zinc nickel or laminar coatings guarantee corrosion resistance up to 700 hours in salt spray tests. .
TRS is a company that supplies high quality wheel fixings and accessories. Our inventory includes nuts, bolts, studs, spacers, spigot rings, tools and just about everything you need to either replace worn out/rusty parts, or to customise your car with new ones. We provide parts from only the most trusted and well-established manufacturers and ship to countries all over the world.
We know that the measurements and specifications of what we sell can sometimes be a bit of a minefield. This is why we also have a team with an in-depth knowledge of the products and the market so even if you don’t know what you need, we do and we’re only a phone call away.
We like to specialise in the obscure and uncommon. That means that we often are able to easily supply parts to people who have been searching everywhere and had no luck. We can supply wheel fixings for everything from a 1964 Hilman IMP to a 2016 Porsche Carrera.
If you have any questions about us or need any help whatsoever finding the parts you need, give us a call on 01908 968074. If it’s outside of office hours then just leave a message and we’ll get back to you.