Introduction:

100%Brand new.

 

RT-16 lead flashing Product Description:
1, long-range, comprehensive barrier-free trigger lead flashing and outdoor photo studio lights flash.
2, low power consumption, transmitter battery Standby up to a year, up to million times a row trigger, the trigger current is 0.01 mA.
3, the work cost.
4, 16 channels, without disturbing each other.

 

RT-16 lead flashing device main parameters:
1, the transmitter power: 23A  12V small battery.
2, the receiver power supply: 2 AAA 1.5V batteries (please do not use rechargeable batteries, because microarrays operating voltage of 3 volts).
3, working from the outside (open ground) ≧ 25-30 meters.
4, indoor working distance ≧ 25 meters.
5, sync speed: 1 / 250 sec.
6, the radio frequency: 433MHZ (and older can not be universal)


RT-16 lead flashing device to use:

A, the frequency of the receiver switch (7) and the transmitter frequency switch (7) pull to the same location.
B, the receiver trigger output plug into the sync jack studio lights.
C, the power switch on the receiver (6) according to the ON position.
D, press the transmitter button to test flash (9) At this point the receiver trigger signal indicator (5) flash, studio lights flash simultaneously
Light work.
E, the transmitter's hot shoe (8) into the camera's hot shoe seat to work properly.
F, cameras without hot shoe seat, you need to sync the line with one end into the transmitter sync jack (1) the other end into the camera's sync socket.

 

Using the RT-16 lead flashing device Note:

1, the use of batteries in line with the machine.
2, the battery will run out, the receiver stopped working, update the battery.
3, or fall and avoid collision with hard objects.
4, should be confirmed prior to use studio flash trigger.
5, there are other places such as the use of radio waves, the phenomenon may be leak flash.

 

Suitable For:
Work with all Camera units using universal hot shoe like Nikon, Canon, Sigma, Olympus, Pentax (except Sony, Minolta as they use a special hot shoe; Sony, Minolta can use standard hot shoe camera).

 

Package included:

1 x Hot Shoe socket
1 x Receiver
1 x 3.5mm to 6.3mm plug adapter

 

NOTE:The battery does not included.

PushAuction