Pls Note:
If you need to return the item for some reasons,
please contact us via eBay message at the first time to get the RMA # and the return address
instead of sending back directly without permission,thank you!
Original Autel MaxiVCI Mini VCI Mini Bluetooth-compatible Diagnostic Interface
Autel VCI Mini is designed to connect wirelessly with the MaxiCom / Maxicheck / MaxiPro and MaxiTPMS Display Tablet, as a vehicle communication interface (VCI) for vehicle data transmission. Thanks to the wireless Bluetooth-compatible technology, with which you are allowed to work freely around the vehicle. This interface device can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics.
Tips:
1. Connects to The Vehicles OBDII Port
2. Lightweight Vehicle Connection Interface (VCI)
3. Enables The Autel Tablet to Connect to The Vehicles
4. Allows Technician to Perform Testing Outside Vehicles
5. The Tablet in This Advertising is Not Included! It is for Reference Only!
6. The MaxiVCI Need to Be Used With Autel Tablet Device Like MK808BT, MK808TS, MX808TX, MP808TS, etc.
Power Sources
The MaxiVCI Mini operates on 12-volt vehicle power, which is received through the vehicle's DLC. The unit powers on whenever it is connected to the vehicle's DLC.
Autel MaxiVCI – Vehicle Communication Interface
The wireless diagnostic interface MaxiVCI Mini is a small vehicle communication interface (VCI) used to connect to a vehicle's data link connector (DLC) and connect wirelessly with the tablet for vehicle data transmission.
1. Vehicle Data Connector (16-Pin) – connects the MaxiVCI Mini to the vehicle's 16-pin DLC directly.
2. Power LED – refer to Table 2- 2 Power LED on the Front Panel
3. Connection LED – refer to Table 2- 3 Connection LED on the Front Panel
4. USB Port – provides the easiest connection between the device and the tablet via a USB cable.
Table 2- 2 Power LED on the Front Panel
LED | Color | Description |
Power | Green | Lights solid green when powered on |
Red | Blinks red when system failure occurs. Note: The power LED briefly lights red each time the device powers on and then lights green when the device is ready |
Table 2- 3 Connection LED on the Front Panel
LED | Colo | Description |
Connection | Green | * Lights solid green when the device is successfully connected via the USB cable but is not communicating with the vehicle. |
Blue | * Lights solid blue when the device is successfully connected via BT but is not communicating with the vehicle. |
Specification:
Item | Description |
Communications | * BT V.2.1 + EDR |
Wireless Frequency | 2.4 GHz |
Input Voltage Range | 12 VDC to 24 VDC |
Supply Current | 150 mA @ 12 VDC |
Operating | 0°C to 50°C (ambient) |
Storage | -20°C to 70°C (ambient) |
Product Display:
Autel MaxiSYS-VCI100 Compact Bluetooth Vehicle Communication Interface
This MaxiSYS VCI100 Bluetooth-compatible Interface Can Work for Maixsys Series Tool including MS906BT, MS906TS, MK908, MS908, MS908S Pro, MK908P,MK906BT and Maxisys Elite.
Description:
The wireless diagnostic interface MaxiVCI V100 isa small interface box used to connect to a vehicle's diagnostic connector (DLC) and connect wirelessly with the MaxiSys Display Tablet, as well as standalone PC, as a vehicle communication interface (VCI) for vehicle data transmission. Thanks to the wireless BTtechnology, with which you are allowed to work freely around the vehicle.
The MaxiVCI V100 can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics. The development of this interface has been focused on reducing the communication time, and ensuring the tool is practical to use.
The MaxiSys diagnostic platform combines the MaxiVCI V100 and the display tablet with technical information into a single program, ensuring quick and simple access to the vehicle to perform comprehensive diagnostics applications.
General Notice:
The new, ultra-compact MaxiSYS-VCI100 features the latest advances in wireless Bluetooth-compatible connectivity. It has been carefully designed and tested to comply with OBDII protocols. However, some vehicle models are not in full compliance with these protocols for various reasons. In addition, the computer control systems or sensors on any given vehicle may be malfunctioning.
While Autel's testing and the experiences of the users haveshown the unit to be safe and reliable, there is an inherent risk in using any product that may potentially affect the operation or drive-ability of your vehicle.?
If you are concerned about the operation of your vehicle at any time while using the MaxiVCI V100
1. Pull off the roadway immediately or as soon as it is safe to do so.
2. Disconnect the devicefrom the OBDII port.
3. Consult a licensed mechanic or automobile service center.
Features and Benefits:
Wirelessly connects vehicle ECU to MaxiSYS tablets supporting Bluetooth-compatible
Features convenient wireless Bluetooth-compatible technology enabling tech to perform diagnostics outside of vehicle
Supports comprehensive diagnosis and reading of control modules
Ultra-fast OBDII-port communication within 75 feet
Undateable software via the Internet
Functional Description
The MaxiVCI V100 device package includesthe unit, user manual, and a CD with driver program and update agent.
1. Lighting Push Button
2. PowerLED
3. VehicleLED
4. Connection LED
5. Vehicle Data Connector (16-Pin)
6. USB Port
Specifications:
Item | Description |
Communications | BT V.2.1 + EDR |
Wireless Frequency | 2.4 GHz |
Input Voltage Range | 12 VDC |
Supply Current | 150 mA @ 12 VDC |
Operating Temperature | 0°C to 50°C (ambient) |
Storage Temperature | -20°C to 70°C (ambient) |
Built-in Battery | 3.7V Lithium Battery |
Light | White LED |
Package List:
1pc x Autel MaxiSYS VCI100
Autel MaxiVCI V200 Bluetooth Vehicle Communication Interface
Autel MaxiVCI V200 wireless diagnostic interface is a small interface box used to connect to a vehicle's diagnostic connector (DLC) and connect wirelessly with the MaxiSYS Display Tablet, as well as standalone PC, as a vehicle communication interface (VCI) for vehicle data transmission. Thanks to the wireless BT technology, with which you are allowed to work freely around the vehicle. The MaxiVCI V200 can communicate with vehicles' electronic control units (E-CUs), guaranteeing performance and speed that redefine multi-brand diagnostics. The development of this interface has been focused on reducing the communication time, and ensuring the tool is practical to use. The MaxiSYS diagnostic platform combines the MaxiVCI V200 and the display tablet with technical information into a single p-rogram, ensuring quick and simple access to the vehicle to perform comprehensive diagnostics applications.
Product Features:
1. Compatible with Autel BT609, MaxiIM KM100, MS906Pro, MS906Pro-TS, MaxiBAS BT608, MaxiTPMS ITS600
2. Supports The Latest OBD2 Protocols: DoIP and CAN-FD (4-pin sets)
3. Built-In Battery, Internet Update, User Friendly
4. Ultra-Fast OBDII-Port Communication Within 75 Feet
5. Supports Comprehensive Diagnosis and Reading of Control Modules
6. Wirelessly Connects Vehicle E-CU to MaxiSYS Tablets Supporting Bluetooth
7. Features Convenient Wireless Bluetooth Technology Enabling Tech to Perform Diagnostics Outside of Vehicle
Functions:
1. Connects to the vehicles OBDII port
2. Lightweight vehicle connection interface (VCI)
3. Enables the Autel tablets to connect to the vehicles
4. Allows technicians to perform testing outside of the vehicles
5. The tablets mentioned in this advertisement is not included! It is for reference only!
6. The MaxiVCI V200 needs to be used with Autel tablets like MS906 PRO, ITS600, etc.
VCI LED Description:
LED | Color | Description |
Power LED | Yellow | The VCl is powered on and performing self-check, |
Green | The VCl is ready for use. | |
Flashing Red | The firmware is updating. | |
Vehicle/Connection LED | Green | Solid Green: The VCI is connected via USB cable. |
Flashing Green: The VCl is communicating via USB cable. | ||
Blue | Solid Blue: The VCI is connected via Bluetooth. | |
Flashing Blue: The VCI is communicating via Bluetooth. |
General Notice:
The new, ultra-compact MaxiVCI V200 features the latest advances in wireless Bluetooth connectivity. It has been carefully designed and tested to comply with OBDII protocols. However, some vehicle models are not in full compliance with these protocols for various reasons. In addition, the computer control systems or sensors on any given vehicle may be malfunctioning.
While Autel's testing and the experiences of the users have shown the unit to be safe and reliable, there is an inherent risk in using any product that may potentially affect the operation or drive-ability of your vehicle.
If you are concerned about the operation of your vehicle at any time while using the MaxiVCI V200
1. Pull off the roadway immediately or as soon as it is safe to do so.
2. Disconnect the device from the OBDII port.
3. Consult a licensed mechanic or automobile service center.
Specifications:
Communications | BLE + EDR |
Wireless Frequency | 2.4 GHz |
Input Voltage Range | 6-36 VDC |
Supply Current | 150 mA @ 12 VDC |
Operating Temperature | -10°C to 60°C (ambient) |
Storage Temperature | -40°C to 80°C (ambient) |
Built-in Battery | 3.7V Lithium Battery |
Light | White LED |
How to Use Autel MaxiVCI V200
Package Includes:
1pc x Autel MaxiVCI V200
Autel Wireless Diagnostic Interface Bluetooth VCI Device for Maxisys Tool
Description:
The Bluetooth Diagnostic Interface is a multi-brand device which comes with the MaxiSys tool kit. It is designed to connect wirelessly with the MaxiSys Display Tablet, as well as standalone PCs, as a vehicle communication interface (VCI) for vehicle data transmission. Thanks to the wireless Bluetooth technology, with which you are allowed to work freely around the vehicle.
This interface device can communicate with vehicles' electronic control units (E-C-Us), guaranteeing performance and speed that redefine multi-brand diagnostics. The development of this interface has been focused on reducing the communication time, and ensuring the tool is practical to use.
The MaxiSys diagnostic platform combines the VCI device and the display tablet with technical information into a single p-rogram, ensuring quick and simple access to the vehicle to perform comprehensive diagnostics applications.
Autel Wireless VCI Features:
1. Supports comprehensive diagnosis and reading of control modules.
2. Designed to connect wirelessly with the MaxiSys Display Tablet, as well as standalone PCs via a USB 2.0 full-speed connection.
3. Features convenient wireless Bluetooth technology, which allows you to work freely around the vehicle.
4. Reduces the communication time, and guarantees performance and speed that redefine multi-brand diagnostics.5.
5. Support Update online.
6. Works with Autel Maxisys mini, MS905, MaxiSys Pro, MS908, MS908S, MK908 scanner.
Product Function:
Auto diagnostics to read and clear the error memory, to display system parameters and the status of the E-C-U;
Activation, adjustments and configurations that are essential for ensuring a complete repair;
Resetting the service lights or the airbag systems;
Configuration of the E-C-Us, keys and remote controls, etc.
Capabilities
When used in conjunction with the display table or the OEM softwares from the PC, the Bluetooth Diagnostic Interface device is able to perform the following functions:
1. Auto diagnostics to read and clear the error memory, to display system parameters and the status of the E-CU;
2. Activation, adjustments and configurations that are essential for ensuring a complete repair;
3. Resetting the service lights or the airbag systems;
4. Configuration of the E-CUs, keys and remote controls, etc.
Wireless Communication
The Bluetooth Diagnostic Interface supports Bluetooth communication. It can transmit vehicle data to the MaxiSys Display Tablet without a physical connection. The working range of the transmitter through Bluetooth communication is about 755 feet (about 230m). A signal lost due to moving out of range automatically restores itself when the display unit is brought closer to the VCI unit.
For detailed information about VCI connection with the MaxiSys display tablet, please refer to the MaxiSys User Manual.
USB Connectivity
The VCI device also provides a direct connection to the MaxiSys display tablet or a PC via a USB 2.0 full-speed connection. All of the electronics are contained in the device shell, making it a compact and rugged vehicle communication tool.
Power Source
The Bluetooth Diagnostic Interface operates on 12-volt vehicle power, which it receives through the vehicle data connection port.
The unit powers on whenever it is connected to an OBD II/EOBD compliant data link connector (DLC).
It can also be powered through connection with a PC via the USB cable, so there's no need to connect the device to the vehicle when performing firmware update through the PC
Functional Description
The Bluetooth Diagnostic Interface device package, which includes the unit, user manual, and a CD with driver p-rogram and update agent, comes along with the MaxiSysTM/ MaxiSys MiniTM tool kit. Please refer to the MaxiSys User Manual for additional information
1. Vehicle Data Connector (DB15-Pin)
2. Power LED
3. Vehicle LED
4. Error LED
5. Bluetooth LED
6. USB LED
7. USB Port
Vehicle Data Connector
The vehicle connector connects the device to the vehicle's DLC via a standard DB15 – Pin OBD II cable.
Status LEDs
There are 5 status LEDs on the front panel of the VCI device, which indicates its working status as well as the hardware conditions, and are very useful for troubleshooting the device's communication or connection to the Vehicle, display tablet and/ or the PC. See Table 1 for detailed description of the status LEDs.
LED | Description |
Power | Illuminates solid green when powered on. |
Vehicle | Flashes Green when communicating with the vehicle's network. |
Error | Illuminates solid red when serious hardware failure occurs; also flashes red when performing firmware update |
Bluetooth | Illuminates solid green when connected with the MaxiSys display tablet through Bluetooth communication; also flashes green when transmitting data between the vehicle and the display tablet. |
USB | Illuminates solid green when the device is properly connected, and communicating with the MaxiSys display tablet or the PC via the USB cable |
USB Port
The USB port provides the easiest connection between the device and the display tablet or the PC via a USB cable, and is used to control the device from the software application running on the PC.
Product Troubleshooting
This part describes problems that you may encounter while using the VCI device.
1. Vehicle Linking Error
A communication error occurs if the interface device fails to communicate with the vehicle's control module when performing diagnostic procedures. You need to do the following check-ups:
1). Verify that the ignition is ON.
2). Check if the interface device's OBD II connector is securely connected to the vehicle's DLC.
3). Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and continue the operation.
4). Verify the control module is not defective.
2. PC Communication Error
1). Verify the interface device is powered, and the green power LED is illuminated.
2). Check if there is any firewall software interfering with the connection port.
3). Check if the green status light is illuminated for USB communication.
If these issues have been addressed, verified, and you are still having trouble, please contact technical supports for assistance. Refer to the MaxiSys User Manual for additional information.
Specifications:
Communications: Bluetooth V.2.1 + EDR/USB 2.0
Wireless Frequency: 2.4 GHz
Input Voltage Range: 12 VDC
Supply Current: 200 mA @ 12 VDC
Operating Temperature: 0°C to 50°C (ambient)
Storage Temperature: -20°C to 70°C (ambient)
Package List:
1pc x Autel Wireless Diagnostic Interface
1pc x USB Cable