27" Screen with Trackball mounting DIY BARTOP ARCADE MACHINE MDF 18MM With T MOLDING

27" Screen Arcade Bartop Flatpack Cabinet With Trackball Mounting Hole Please note that the pictures are of our 22" kit, this kit is of the same design but has been made larger Maximum Screen Size 430mm High x 675mm Wide What You Will Get 2 Side Panels with 2mm t molding slots Front Panel with 3 x 30mm holes cut Control Panel with 6 x 30mm button holes and 2 x joystick holes cut and a 2mm t molding to the front Monitor bar pre drilled Base Panel Speaker Bar with Slots Top Panel Back panel is designed to be hinged, this has ventilation slots, fused IEC socket, 80mm fan and cam lock holes T Molding Length Required 4.8 Meters – 15.9 Feet Dimensions Height - 678mm Width - 706mm Depth - 524mm Modifications Most modifications will be free, if it’s a drastic change then there will be a small charge Please ask about any modifications as each cabinet is made to order Assembly As you can see from the pictures i have used plastic fixing blocks, you could also use wooden batons, both can be purchased from your local diy store. These blocks/batons will not be supplied as everybody puts their cabinet together differently, On our kits we have included cut outs for where you can put the blocks if you so wish, These are added to each kit we make. There are no instructions with the kit as its very clear how to put it together especially if you are building the full set up. If you need any help along the way please email us.