eBay

Kirby Sentria Neutral Drive Pedal fits G3, G4, G5, G6 G7, G7D, G10 PN 558406

Kirby Sentria G10 Neutral Drive Pedal fits G3, G4, G5, G6 G7, G7D, AV PN 558406 - Picture 1 of 3

Genuine Kirby

For those who appreciate

QUALITY, RELIABILITY & PERFORMANCE

The neutral drive pedal seldom breaks, but I have seen the shifting lever on the back of this assembly come loose. This part has break/away pedals, an improvement from early Generation Models. If you think that your pedals are broken because they separate in the middle, not to fear, they were made to do that. This feature prevents you from shifting gears accidentally.

This part is the Sentria G10 color, but will fit all Generation and Sentria models.

This comes with the bottom scuff plate screw.

Installation will require removal of the transmission.

To Remove Cover Assembly and Transmission:

A. Remove the handle, floor nozzle and emptor from power unit.

B. Remove scuff plate by: 1. Remove the screw at the top of the scuff plate for the cord clip. 2. Insert a flat screwdriver into the slot above the switch pedal and lift. 3. While applying downward pressure to the top of the scuff plate carefully slide it to the rear of the power unit. Once the clips at top of scuff plate are free you can lift it off.

C. Remove cover casting by: 1. Raise the headlight cap and remove the two flat screws at the front of the cover casting. 2. Remove two screws at the rear of the cover. (These were under the scuff plate) 3. Lift the cover casting off.

D. Remove the on/off foot pedal by: 1 Inserting a thin flat bladed screwdriver under the pivot points of the on/off pedal and pry them off the pivot pins. 2. Carefully lift the on/off foot pedal up and out of the power unit until sufficient clearance is available to slide the power switch actuating rod out of foot pedal. Leave the rod connected to the power switch.

E: Removing the Transmission: 1 Turn the power unit over, and remove the three screws holding the transmission in. two of the screws are near the back wheels, and the third screw is centered, but is three inches from the back of the power unit. DO NOT remove the center screw that is at the back of the power unit. 2. While supporting the transmission turn the power unit over. 3. Set the N/D pedal in drive. 4. Lower the transmission a little to get some slack in the drive belt, then remove the drive belt. 5. Make sure the power switch actuating rod is pointing upward, then remove the transmission from the power unit.

F Removing the Neutral Drive Pedal. 1 Observe how the N/D pedal fits into the bracket cam assembly frame in front of it. 2. Remove the remaining screw in the bottom of the transmission. 3. Remove the N/D Pedal Assembly by lifting up and back. congratulations!

G. Assembly is in reverse

Shipping is Calculated.

Part Number: 558406S

Kirby Sentria G10 Neutral Drive Pedal fits G3, G4, G5, G6 G7, G7D, AV PN 558406 - Picture 2 of 3

Payment and Shipping

Please read.

USPS Postage rates increased again in January 2016. It now costs $2.54 for a 1 ounce parcel. Of course heavier packages cost more. International rates start at $13.50 for a single ounce to most countries.
I ship fast, usually the next day, check my feedback. Watch for an email from Ebay, InkFrog or UPS with the tracking information.
Combined Shipping: If you will use your cart eBay will combine shipping based on the weight of each item purchased. You will be able to see costs before buying. Some items that ship priority may not combine with small first class items. This is always true for liquids or other items shipped in Flat Rate Envelopes.
International buyers must be logged into eBay.com to have a cart available. If you are logged into your countries ebay site you will not see the cart option.
You can purchase all items needed before paying, provided you have not linked your PayPal and eBay account. You can also request an invoice from me after making all purchases.
If you cannot make a purchase without paying you have linked your PayPal and eBay account.How do you disable the new checkout experience? (Disabling linked paypal/ebay accounts)
You can disable the streamlined checkout experience while you’re on the last page in checkout at any time. Under the “Pay with” section, click Unlink accounts then select Remove your PayPal and eBay account from the options listed. Your accounts will then be unlinked, and you’ll be able to pay with PayPal just like you used to by logging in to PayPal.
If you are purchasing multiple items please put all purchases in your cart before paying. If you pay after each purchase you will be not receive the combined shipping discount mentioned above.
Questions?At the bottom of the listing you will see a link toAsk a Question.
International customers are liable for any import duties or other taxes their government may impose.
If you are not sure of parts application, write me.

Special note to international buyers: USPS rates went way up for first class parcels. For this reason it is important to use a cart to make all purchases. Weights from 1 to 8 US ounces pay the same cost, and from 9 to 32 ounces pay the same. You can purchase a brush roll and a 6 pack of bags for the same shipping as either one alone. It only makes sense to get all your Kirby Needs in one larger package.

Thanks for looking.

Feedback

To insure that those who care about Feedback receive it; I have now automated my feedback so that it will be automatically posted once you post feedback for me.

I accept Paypal, if you need to make other arrangements please contact me prior to buying or biding on my listing.