Description
Antenna Base Antenna Mount Accessory Suitable for Shortwave SW Telescopic Antenna V Antenna
Description:
The short-wave V telescopic antenna base is a little smaller than before, making it easier to carry. With M connector (S0-239), it can be connected directly to a feeder.
The bottom plate uses 5mm epoxy board, and the board is made by CNC cutting and punching. It is sturdy and has excellent insulation. Antenna interface is M female connector and M10 is used as a telescopic antenna port. Common 5.6m/18.4ft stainless steel telescopic antenna can be screwed on for use. After connecting the 5.6m/18.4ft antenna, adjust the length of the rod and the antenna can work at 14-54MHz, and the withstand power is 200W. The recommended erection height is 3m/9.8ft and above.
The fixing parts are made of 304 stainless steel fasteners, and the black fixing rod in the center is made of solid aluminum alloy. The whole is processed by CNC lathe, and the surface is knurled and anodized. There are 1/4 and 3/8 internal threads on both ends. It can be attached to a common photographic tripod or light stand.
To prevent back-flow of high-frequency current over the feeder sheath, a simple hollow choke can be wound around the feeder near the antenna end, as shown in the figure below.
Attention:
- Light stand, feeder and telescopic antennas pictured are not included, for demonstration purposes only. Please purchase them separately.
- The recommended height of a light stand is about 3m/9.8ft or above for better results.
Package Included:
- 1 x Antenna Mount
Packaging Details:
- G.W.: 0.6kg
Description:
The short-wave V telescopic antenna base is a little smaller than before, making it easier to carry. With M connector (S0-239), it can be connected directly to a feeder.
The bottom plate uses 5mm epoxy board, and the board is made by CNC cutting and punching. It is sturdy and has excellent insulation. Antenna interface is M female connector and M10 is used as a telescopic antenna port. Common 5.6m/18.4ft stainless steel telescopic antenna can be screwed on for use. After connecting the 5.6m/18.4ft antenna, adjust the length of the rod and the antenna can work at 14-54MHz, and the withstand power is 200W. The recommended erection height is 3m/9.8ft and above.
The fixing parts are made of 304 stainless steel fasteners, and the black fixing rod in the center is made of solid aluminum alloy. The whole is processed by CNC lathe, and the surface is knurled and anodized. There are 1/4 and 3/8 internal threads on both ends. It can be attached to a common photographic tripod or light stand.
To prevent back-flow of high-frequency current over the feeder sheath, a simple hollow choke can be wound around the feeder near the antenna end, as shown in the figure below.
Attention:
- Light stand, feeder and telescopic antennas pictured are not included, for demonstration purposes only. Please purchase them separately.
- The recommended height of a light stand is about 3m/9.8ft or above for better results.
Package Included:
- 1 x Antenna Mount
Packaging Details:
- G.W.: 0.6kg
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Feb 17, 2024 at 03:24:27 PST, seller added the following information: