KIT Activator 21 spray 200 ml and GLUE 21 Cyanoacrylate extra strong 21 gr

This kit, Activator spray with Glue 21 cyanoacrylate extra strong with precision cannula, is ideal for quickly and permanently bonding rubber, metal, ceramics, wood, leather, cardboard and plastic.
The activator 21 spray combined with Glue 21 will allow you to promote adhesion and accelerate it.


Glue 21 extra strong allows:

Glue 21 is an anaerobic, cyanoacrylate, extremely adhesive and resistant multi-purpose glue.

• Allows fast gluing (10/15 seconds) by pressure on the parts
• Withstands a temperature of 150°C
• Resistance of 180 kg / cm2
• Resistant to water, shocks and vibrations
• Ideal for all DIY, repair or construction work
• Enables clean, streak-free bonding


The activator 21 spray allows:

• Allows you to gently and firmly glue small parts without damaging them
• Accelerates drying and bonding time
• Allows to reinforce the bonding points
• Transparent, does not leave marks on surfaces
• Does not damage paintwork

Can be applied in two different ways:

• Apply Activator 21 to one of the parts to be bonded and Colle 21 super glue to the other part, then quickly join the two parts. Wait for the glue to work.

• Either immediately after having glued the two parts together using Colle 21 super glue, spray the activator on the joint of the glued parts. Then wait for the glue to dry.
Spray at a distance of 20 to 30 cm from the surface.

The kit includes:

• A bottle of extra strong 21 Cyanoacrylate glue 21gr with precision cannula
• An Activator 21 aerosol for Cyanoacrylate glues, 200ml can

Security Information

Attention !

Causes skin irritation.
Causes serious eye irritation.
May irritate the respiratory tract.
Cyanoacrylate. Hazard. Bonds to skin and eyes in seconds.
Keep out of the reach of children.

Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN : Wash off with plenty of water.
IF INHALED : Transport the person outside and keep them in a position where they can comfortably breathe.
IF IN EYES : Rinse cautiously with water for several minutes. Remove contact lenses if the victim wears them and if they can be easily removed. Continue rinsing. Take off contaminated clothing and wash it before reuse.

Contains: Ethyl-2-cyanoacrylate.

UFI: GF10-J0J6-K003-W33W

Bottle and cap: HDPE 2

Security Information

Attention !

Hazard. Causes skin irritation. May cause drowsiness or dizziness.
Harmful if swallowed.
Extremely flammable aerosol.
Pressure vessel: may burst if heated.
Toxic to aquatic organisms, causes long-term adverse effects.
Keep away from heat, hot surfaces, sparks, open flames and all other ignition sources. NO SMOKING.
Do not spray on an open flame or any other source of ignition.
Do not puncture or burn, even after use.
Keep out of reach of children. Avoid breathing aerosols.
Wear protective gloves/protective clothing/eye protection/face protection.
Use only outdoors or in a well-ventilated area.
Protect from sunlight. Do not expose to temperatures above 50°C / 122°F.

UFI: PF30-60EA-M00F-4XHD