1500W USB 4 Axis 6090 CNC Router 3D Engraver Metal Milling Engraving Machine New
4axis Usb 1500w Cnc Router Engraving Machine Engraver for Wood Acrylic 6090 Ball Screw

Description:
 


Cnc Router Engraving Machine Parameters:


Model: Cnc6090gz

Outside Dimension: 1150*970*650mm(L*W*H)

Working Platform Size: 1045*720mm(L*W)

Frame Material：the Whole Machine Used 6061 Aluminum Profiles

Max. Feeding Height: ≤140mm(from Base of Z Axis to Platform)

X,Y,Z Working Area: 900(Y)*600(X)*140mm(Z)
 


Sliding Unit:


X Axis:sfu1605 Ball Screws

Y Axis:sfu1605 Ball Screws

Z Axis:sfu1204 Ball Screws
 


Drive Unit:


X Axis: Ø20 High Intensity Round Rail,

Y Axis: Sbrø20 High-strength Aluminum Base Rails

Z Axis: Ø12 High-strength Round Rail

Stepping Motor: 57 Two-phase 3a  

Driving Power for Stepping Motor: Ac110, 240w, out Put: Dc24v, 10a

Maximum Idle Speed: 1500mm/Min

Working Speed: 50-1500mm / Min (Different Material with Different Speed Settings)

Spindle Motor: 1500w High-speed Variable Frequency Spindle Motor , Er11 Chuck, with 6mm Collet.
 


(Tips：1. the Spindle Motor Must Connect with the Vfd.
 
 
2. It Cannot Directly Connect with the Supply Voltage (Ac 110v).
 
 
3. Please Don’t Change the Data Setting of the Vfd If You Are Not Professional Technicians, or It Might Damage the Spindle Motor.)


Drive of Stepping Motor: 0-3.5a Adjustable Four-axis Drive

(Tb6560ahq Chip, 24v Power Supply, 2,4,8,16 Subdivision Can Be Set, Factory Settings 8 Subdivision)

Repositioning Precision: ≤0.05mm

Cooling: Water-cooling

Speed: 0-24000r/M

Spindle Precision: Radial Runout ≤ 0.03mm

Carving Command: G Code / Tab File / Nc File / Ncc File

Vfd: Ac110v, 1500w, 0-400hz (Built-in Control Box)
 
 
 

Usb Control Box Parameters


Protection: Emergency Stop Button

Communication Interface: Through Usb Port Connect with Computer

Support System: Windows Xp / Win7 with 32 Bit

Input Volts: Ac 110v
 
 
 

Application Industry:
 


Woodworking Industry: Sculpture, Round Carving, Wooden Handicraft Processing

Advertising Industry: Advertising Signs, Logo Making, Cutting Acrylic, Plastic Molding, Suit for Making a Variety of Materials Advertising Decorative Products

Other Industries: the Engraver Could Do Shadow-carved, Sculpture Which Widely Used in the Gift Industry; Can Be Used in Aluminum Cutting Industry,Such As Aluminum, Aluminum-plastic Plate, Aluminum Honeycomb Panels, Aluminum, 3d Engraving Process, Artificial Plate, Cutting Led and Neon Letter , Making Plastic Light Box Model; Also Can Engrave on Acrylic, Copper, Pvc Board, Artificial Stone, Mdf Board, and Other Metal Sheet.
 
 
 
 
 
 
Feature:

1. the New 1.5kw Water-cooled Vfd Is Available Operating for Long Time,Which Can Reinforced the Processing Ability of the Machine and Can Be Used to Engrave on Aluminum Alloy and Hard Wood.

2. Water Cooling Spindle Works More Stable and Durable.

3. High Quality Accurate Ball Screws Drive Make the Engrving More Precision. Anti-blackflash, High Precision, Long Life Circle.
 
 
How to Use:

1. Assembling and Locating the Cnc Machine on Steady Desk Well.
 
2. Make Sure That Your Computer Has a Usb Port Output.
 
3. Place the Control Box in a Ventilated Dry Place Where There Is No Dust, No Moisture
 
4. Connecting the Control Box with the Cnc Machine and You Computer and Make Sure the Plug Will Not Come off.
 
5. Correctly Connect the Machine with the Controller. Don't Suspended the Cable Which Connect the Spindle Motor with Axis(X, Y, Z, a). Otherwise, It Will Damage the Driver of the Controller.

6. Correctly Instal the Spindle Motor and the Heat Pump. the Heat Pump Should Be Covered Completely in the Water, Then Turned on the Electric Current to Check Whether the Water-cooling System Working Well.

7. Before Turn on the Machine, Please Check All the Cable and Water- Cooling System to Make Sure They Are Working Fine.

8. You Can Enjoy Making You Dream with Using Our Cnc Machine Now.
Description:
 
Waterproof Design, Very Durable, Anti-dirt, Oil Spray
 
Power by Usb Port
 
Dimensions: 22 X 8 X 3cm
The Usb Self-check Light, You Can Type the " Scroll" on the Keyboard to Activate It.

Directional Motion Control: X+,X-,Y+,Y-,Z+,Z-,a+,a-
 
Feed Rate Control: F+,F-
 
Jog Rate: J+,J-
 
Spindle Speed: Speed up, Slow down
 
Programming: E-stop,Cycle Start,Spindle on/off,Redo,Single Step,Original Point

Package Include
 
1 * Remote Controller
 
1 * Cable
Support Win7 64-Bit and Win10 64-Bit Installation
 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
*Feature:High quality!Great Communication!
shipping noticeCan not ship to Puerto Rico,Alaska/Hawaii
Model6090
X,Y,Z Working Area900(Y)*600(X)*140mm(Z)
Max. Feeding height≤140mm(From base of Z axis to platform)
Stepping motor57 two-phase 3A
Spindle motor1500W high-speed variable frequency spindle motor
Spindle speed:24000 rpm
Principal axis collet:ER11 chuck, with 6mm collet.
CoolingWater-cooling
Working platform size1045*720mm(L*W)
Communication interfaceUSB PORT
ControlCNC
Machine Type4 Axis Router Machine
EANDoes not apply
UPCDoes not apply
ISBNDoes not apply
BrandCNCEST
MPNDoes Not Apply
PushAuction

On Mar 4, 2024 at 20:32:39 PST, seller added the following information:

DataCaciques