Features:
* You will get a new and high quality Water Test Pen!
* Made of high quality materials, high quality manufacturing process, sturdy and , excellent service life.
*Portable Total Dissolved Solids / EC / SALT / S.G / TEMP water quality tester, mainly used to test Total Dissolved Solids (ppm /), EC (uS / cm, mS / cm), SALT (%), S.G (seawater gravity) and TEMP (ºC/ºF),The pen model is simple and portable. By placing the meter in solution, it provides a fast, stable response to readings and has a calibration feature to ensure high accuracy.
*Small
but powerful, the water tester is widely used in DWC hydroponic
s, RO/DI water, drinking water, tap water, beer, wine, kombucha,
milk, home brewing, swimming pools, aquariums, reef tanks, hot tubs,
aquaculture, spas, fish tanks and urine.
*Mode of operation:
1. Press ON / OF to turn on the meter, remove the protective cap and place it in the solution to be measured without immersing it above the submerged line. Then gently shake it several times in the water to eliminate air bubbles around the electrode and read the correct measurement value after the value has stabilized
2. Press MODE / CAL will enter different models, Total Dissolved Solids in PPM or PPT, EC in uS or mS, salt in % and seawater specific gravity in S.G.
3. Press HOLD / TEMP, it will be displayed in the upper left corner of the screen to indicate that the value has been held, then remove the meter from solution and read the value, press HOLD / TEMP again to exit the hold mode.
4. Press and hold HOLD / TEMP for a long time, the screen will toggle betweenºC andºF
*Calibration:
It needs to be calibrated after long time use, put it into standard solution, enter Total Dissolved Solids / EC mode, press MODE / CAL for four seconds, it will enter auto calibration mode, the corresponding value will flash on the screen, press HOLD / TEMP to plus or MODE / CAL to minus, and then calibrate it to the standard solution value, flicker three times and then calibrate it to be completed.
Specifications:
EC:
Range: 0 to 10000uS / cm 10.01-19.99mS 20.1-400mS / CM
Resolution: 1uS / cm; 0.1 mS / cm.
Accuracy: ±2% F.S.
Total Dissolved Solids:
Range: 0 to 1000ppm 1000ppm to 10000ppm 10.1 to 200.0ppt (automatically out of range)
Resolution: 1ppm; 0.1 point
Accuracy: ±2%F.S
Salinity:
Range: 0.00 to 25.00 percent
Resolution: 0.01%
Accuracy: 0.01-5.00% (±0.1%) 5.10-25.00% (±1%)
SG: Specific gravity of seawater 1.000-1.222
Calibration:
EC: Three-point calibration optional (1413uS 12.88mS 111.8mS)
Temperature compensation: ATC
Operating Environment: 0 to 80.0ºC (32.0-176F); <90 percent
Total Dissolved Solids Coefficient: 0.5
Temperature range: 0.1 to 80.0ºC32.0 to 176ºF
Temperature Accuracy: +0.5ºC
Temperature resolution: 0.1ºC/ºF
Auto shut-off: 5 minutes
Power: 3x1.5 LR44
Screen size: 28 * 17mm
Size/Weight: 159 * 34 * 16mm (6.31 * 1.3 * 0.6in) / 60g (2.1oz)
Battery: Low battery indicator
Display:Support backlight
Waterproof rating:IP67
Package Content:
1x 5-in-1 Water Quality Test Pen
Note:
1. Please check the size carefully before purchase.
2.
Due to the difference of computer monitor, the color may be slightly
different from the picture above. Thank you for your understanding.
3. Manual measurement, please allow 2-4mm error.
4. If you have any questions, please feel free to contact us, we will reply and help you solve it as soon as possible.