• Your "Right Part" Checklist
  •  
  • Use the compatibility chart to identify your vehicle.
  •  
  • Visually compare the part you are replacing with our pictures.
  •  
  • Match reference numbers from the Item specifics section above.
  •  
  • Find the year,make, model, engine and trim in vehicle application to ensure.
  •  
  • Install the window regulator as follows: 
  •  
  • Part1 Disconnecting the Window from the Motor
  •  
  • 1.Remove the interior door panel.   
  • 2.Gently remove the plastic door cover. 
  • 3.Locate the window mounting bolts.  

    • Front Right For 1999-2003 Mazda Protege Sedan Power Window Regulator with Motor

    Your "Right Part" Checklist

     

    Use the compatibility chart to identify your vehicle.

     

    Visually compare the part you are replacing with our pictures.

     

    Match reference numbers from the Item specifics section above.

     

    Find the year,make, model, engine and trim in vehicle application to ensure.

     

    Install the window regulator as follows: 

     

    Part1 Disconnecting the Window from the Motor

     

    1.Remove the interior door panel.   

    2.Gently remove the plastic door cover. 

    3.Locate the window mounting bolts.  

    4.Move the window if necessary to access the bolts. 

    5.Remove the bolts while a friend supports the window.  

    6.Raise the window up into the door frame. 

    7.Use masking tape to secure the window in place. 

     

    Part2 Disconnecting the Motor and Regulator

     

    8.Remove the window regulator bolts.  

    9.Locate and remove the window motor mounting bolts.

    10.Disconnect the motor wiring harness connector.  

    11.Remove the motor and regulator through the access port. 

    12. Connect the regulator to the new motor. 

     

    Part3 Installing a New Power Window Motor

     

    13.Slide the new motor and regulator back into place.  

    14.Replace the mounting bolts. 

    15.Reconnect the electrical connector.   

    16.Remove the masking tape and lower the window back down. 

    17.Insert the window mounting bolts.   

    18.Reinstall the plastic liner and interior panel. 

     

    Warranty:

     

    This product is covered by our 1-year warranty.

    If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge


    Item Specifics
    Brand hdautoworld
    Manufacturer Part Number HD15288401D
    position Front Right
    Type Regulator & Motor Assembly
    Operating Mode Electric
    Motor Included Yes
    OE/OEM Part Number 741-741
    Custom Bundle No
    Package Contents 1 Power Window Regulator
    Packaging Type Box
    Manufacturer Warranty 1 Year
    Fit For For 1999-2003 Mazda Protege Sedan
    Superseded Part Number BJ0E58590A BJ0E58590B
    Surface Finish Smooth
    Product Fit Direct fit
    Attachment Type Bolt On
    Performance Part Yes
    Modified Item No
    Installation Instructions Included No
    Gear Material Plastic
    Frame Material Metal and Plastic
    Mounting Hardware Included No
    Fitment Type Direct Replacement
    Interchange Part Number BJ0E58590D BJ0E58590E
    Fitment(Note) Verify this part fits your vehicle using the compatibility chart
    Universal Fitment No
    Material Stainless Steel

    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. We accept payment via PAYPAL only. 

    2. Payment must be made within 4 days of auction closing. 

    3. Total amount due includes the final auction price plus S&H(Shipping and Handling). 

    Shipping

    1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
    2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
    3.We ship to US ONLY.
    4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
    5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.

    Returns

    All of our brand new items come with a 30-Days money-back guarantee.
    We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
    Shipping & handling cost are not refundable.
    Man-made damage by abuse or wrong operation is not covered by this warranty.
    No product liability insurance is assumed.

    Contact Us

    If there have any question pls contact us first(send us ebay message),we will try our best to help!

    Feedback

    1.Once we have received your order, a feedback will be automatically sent to you.

    2.Please let us to know if you have not received our feedback, we will give feedback manually.

    3.If there's any question or problem before leaving feedback, feel free to contact us please, we will try our best to solve it.

    If you feel that we deserve a neutral or negative feedback, please, CONTACT US before leaving any feedback, give us a chance to make things right and leave your a good impression! 

    Shop Category
     Store Home
     Hydraulic Lifter&Roller Lifter
     Timing Solenoid Valve
     LED headlight Assembly
     Running Board Motor
     Fuel Pump
     Window Switch
     Water Pump
     Engine Mount
     Regulator Rectifier
     Cylinder Head Gasket Sets
     Exhaust System Parts
     Alternator
     PTO Clutch
     intake Manifold
     Intake Hose
     winch
     AC Compressor
     Timing Belt Kit
     Cold air intake kit
     Dash cover
     Clinder piston gasket kit
     Window Regulator
     car tool
     Turbocharger
     Tire Pressure Sensor
     Ignition coil
     Drive shaft
     CV Axle Assemblies
     Cv Axle
     Lift Support
     Bumper
     Shocks, Struts & Assemblies
     Car Truck Mirror Assemblies
     TPMS Tire Pressure Sensor
     Brake Caliper
     PVC Fabric RV Awning Fabric
     Other
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Front Right For 1999-2003 Mazda Protege Sedan Power Window Regulator with Motor

    Your "Right Part" Checklist

     

    Use the compatibility chart to identify your vehicle.

     

    Visually compare the part you are replacing with our pictures.

     

    Match reference numbers from the Item specifics section above.

     

    Find the year,make, model, engine and trim in vehicle application to ensure.

     

    Install the window regulator as follows: 

     

    Part1 Disconnecting the Window from the Motor

     

    1.Remove the interior door panel.   

    2.Gently remove the plastic door cover. 

    3.Locate the window mounting bolts.  

    4.Move the window if necessary to access the bolts. 

    5.Remove the bolts while a friend supports the window.  

    6.Raise the window up into the door frame. 

    7.Use masking tape to secure the window in place. 

     

    Part2 Disconnecting the Motor and Regulator

     

    8.Remove the window regulator bolts.  

    9.Locate and remove the window motor mounting bolts.

    10.Disconnect the motor wiring harness connector.  

    11.Remove the motor and regulator through the access port. 

    12. Connect the regulator to the new motor. 

     

    Part3 Installing a New Power Window Motor

     

    13.Slide the new motor and regulator back into place.  

    14.Replace the mounting bolts. 

    15.Reconnect the electrical connector.   

    16.Remove the masking tape and lower the window back down. 

    17.Insert the window mounting bolts.   

    18.Reinstall the plastic liner and interior panel. 

     

    Warranty:

     

    This product is covered by our 1-year warranty.

    If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge

    Item Specifics
    Brand :hdautoworld
    Manufacturer Part Number :HD15288401D
    position :Front Right
    Type :Regulator & Motor Assembly
    Operating Mode :Electric
    Motor Included :Yes
    OE/OEM Part Number :741-741
    Custom Bundle :No
    Package Contents :1 Power Window Regulator
    Packaging Type :Box
    Manufacturer Warranty :1 Year
    Fit For :For 1999-2003 Mazda Protege Sedan
    Superseded Part Number :BJ0E58590A BJ0E58590B
    Surface Finish :Smooth
    Product Fit :Direct fit
    Attachment Type :Bolt On
    Performance Part :Yes
    Modified Item :No
    Installation Instructions Included :No
    Gear Material :Plastic
    Frame Material :Metal and Plastic
    Mounting Hardware Included :No
    Fitment Type :Direct Replacement
    Interchange Part Number :BJ0E58590D BJ0E58590E
    Fitment(Note) :Verify this part fits your vehicle using the compatibility chart
    Universal Fitment :No
    Material :Stainless Steel


    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. We accept payment via PAYPAL only. 

    2. Payment must be made within 4 days of auction closing. 

    3. Total amount due includes the final auction price plus S&H(Shipping and Handling). 

    1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
    2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
    3.We ship to US ONLY.
    4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
    5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.

    All of our brand new items come with a 30-Days money-back guarantee.
    We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
    Shipping & handling cost are not refundable.
    Man-made damage by abuse or wrong operation is not covered by this warranty.
    No product liability insurance is assumed.

    If there have any question pls contact us first(send us ebay message),we will try our best to help!

    1.Once we have received your order, a feedback will be automatically sent to you.

    2.Please let us to know if you have not received our feedback, we will give feedback manually.

    3.If there's any question or problem before leaving feedback, feel free to contact us please, we will try our best to solve it.

    If you feel that we deserve a neutral or negative feedback, please, CONTACT US before leaving any feedback, give us a chance to make things right and leave your a good impression! 


    All rights reserved.