Welcome to the Patkor store auction
In this auction we offer:
1 Pcs, Brand New
RACK hanging cabinet 19 inches 6U 600mm black NEKU TS BOX /T2UK
Parameters:
Rack cabinets are used in IT networks, telecommunications, energy and industry. They are increasingly used in CCTV, RTV-SAT and Audio-Video networks. The devices installed in them are based on the 19" rack standard, but they also constitute the basis for non-rackable, desktop devices such as multiswitches, recorders, amplifiers and power supplies. Dedicated rack shelves are then used for assembly. Cabinets enable proper arrangement of active and passive devices and ensure optimal operating conditions for these devices: cooling, protection against contamination, as well as protection against unauthorized access. Characteristics: Black color (RAL9004) Made of good quality powder-coated steel sheet. Possibility of mounting the door as left or right (easy installation of hinges). The front door is glass, with a lock. The sides open with snaps (and an optional lock, available for purchase), providing access from all sides. Full back. Ventilation holes at the top and bottom of the wardrobe - from the front and on the sides. Space for a fan with mounting holes at the top. Cable entries at the bottom and top of the cabinet are covered with sponge. 4 rack rails for mounting devices (two at the front, two at the back) with adjustable position. Marked spacing (1U) on mounting strips. Grounding connections in the door and base of the cabinet. Wall mounting at 4 points on the rear panel using studs (plugs not included). The set includes two pairs of wrenches and a set of mounting screws for rack rails. The wardrobe is delivered in one flat box, intended for self-assembly. Dimensions: Height: 6U (370mm) Width: 19" (600mm) Depth: 600 (600mm) Load capacity: 45kg NEKU TS series: NEKU TS is a series of solidly made 19" rack cabinets characterized by an optimal price-quality ratio. These cabinets are characterized by modern and elegant design, high ergonomics resulting in comfort of use, efficiently designed passive ventilation. The NEKU TS box cabinet is delivered in one flat box and intended for self-assembly. Cabinets comply with the following standards: ANSI/EIA RS-310-D, IEC297- 2, DIN41494; PART1, DIN41494; PART7, ETSI CHARACTERISTICS Type of cabinet: hanging Usable height: 6U Usable width: 19" External height: 370 mm External width: 600 mm Depth: 600 mm Maximum static load: 45 kg Weight of the cabinet after assembly: 18 kg Color: black (RAL 9004) Front door (front): glazed (tempered glass 4 mm) with a lock, can be mounted on the right or left side Back of the wardrobe: full back Side doors (panels): removable, with latches, with the possibility of installing a lock ( size M17) in place of the seal in the center of the panel TECHNICAL DATA Maximum spacing of mounting profiles: 525 / 505 mm (beams directed in the same or opposite direction) Maximum shelf depth: 550 mm Mounting strips: 4 rack rails for mounting devices (two at the front, two on the back) with numbering of U units and the possibility of adjusting the position Cable entries: on the upper panel: 1 pc. on the lower panel: 1 pc. Active ventilation: space for a fan with mounting holes on the upper panel Passive ventilation: ventilation holes: in the roof - on the top and on all edges except the back floor - on all edges except the back Compatibility: metric, ETSI and international 19" standard Assembly: cabinet delivered in one flat box, intended for self-assembly Additional information: wall mounting in 4 points on the rear panel with pins (pins not included), cable entries at the bottom and top of the cabinet covered with sponge MECHANICAL DATA Material: cold-rolled steel, powder coated Thickness of mounting rails: 1.55 mm Thickness of the upper and lower panel: 1.0 mm Thickness rear door: 1.25 mm Side panel thickness: 1.0 mm Thickness of other elements: 1.25 mm Protection level: IP20 Compliance with standards: ANSI/EIA RS-310-D, IEC60297-2, DIN41494; PART1, DIN41494; PART7 Additional elements: 2 pairs of keys and a set of 10 tin-plated M6 rack mounting screws (equipped with flanges and washers) with cages
(Price for 1 Pcs)
Important information!
Please read the following information to avoid misunderstandings during purchase and shipping.
Shipping:
Due to eBay selling limits, we do not display the full stock quantity.
If you wish to buy more items than are available in our listings,
please contact us via eBay message;
Please specify the quantity you would like to purchase,
shipping location:
country, city, postal code.
Shipping type, economy, standard, express.
We will prepare an offer for you with one shipping cost.
If you bought multiple items from our listing,
eBay charges multiple shipping fees: don't worry about it.
If possible, our shipping department will refund you the overpaid shipping costs through eBay .
We only charge the actual shipping cost.
Shipping cost depends on the dimensions and weight of the package .
We ship from Poland – the European Union .
We ship worldwide.
If your country is not on the shipping list – please send us a message via eBay, and we will provide you with a shipping quote.
Regarding international transactions, the delivery time depends on weather conditions, pandemics, customs policy, national holidays, etc.
Should you have any other questions – please feel free to contact us.
Invoice
We issue 0% VAT invoices .
(Information for businesses registered within the European Union and having an EU VAT number, we issue an invoice with 0% VAT, the auction price does not include VAT)
Returns
We accept returns in accordance with eBay’s terms and conditions.
If you are not satisfied with the product – please contact us.
WELCOME TO OUR OTHER AUCTIONS